Plumbing / Bathroom Accessories
Installation and Specification Guide for Taymor Dual Harmony Bath Collection
A comprehensive guide to the Taymor Dual Harmony bath collection, including installation requirements, technical dimensions for towel bars, paper holders, and modular hooks, and instructions for ordering special finishes.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The Taymor Dual Harmony collection features a one-piece design with concealed screw mounts. All necessary mounting hardware, including plates, nylon anchors, and steel Phillips head screws, is included in the box. Please note that all measurements provided in this document are for reference only and are subject to a 3% variance. Ensure you have the correct SKU and finish code before installation or ordering.
Product Features
- Customizable configurations with moveable hooks to maximize space.
- One-piece design for bars.
- Concealed screw mount for a clean aesthetic.
- Available in various finishes including Polished Chrome and Matte Black as stock items, with special order finishes available upon request.
Installation
The installation process utilizes the provided mounting hardware kit. Horizontal and vertical bars must be connected during the installation process using the provided fastener and Allen key. Ensure the mounting plates are secured to the wall using the provided nylon anchors and screws before attaching the fixture.
Technical Specifications
The collection includes various items with specific mounting plate dimensions:
- Paper Holder mounting plates: 5-1/8 inches by 7/8 inches by 1/4 inches (130 mm x 23 mm x 6 mm).
- Towel Bar mounting plates: 1-3/8 inches by 3/4 inches by 3/4 inches (34 mm x 21 mm x 20 mm).
Detailed dimensional drawings are provided for the 16-inch and 22-inch towel bars, the paper holder, the single modular hook, and the hand towel bar to assist with planning your bathroom layout.
Special Order Finishes
To specify special order finishes, contact a Taymor Sales Representative for pricing, samples, and minimum order quantities. To determine the item code for a special order finish, add the finish code (e.g., BB for Brushed Brass, DB for Dark Bronze) to the end of the product SKU. Note that special order products are not eligible for return or exchange, and lead times may vary.
Customer Support
For product warranty information, visit taymor.com. For customer service, contact West at 1-800-267-4774 or East at 1-800-387-7064.
Official resources from the manual
Practical help
Common problems
Measurement variance
All product measurements are subject to a 3% variance; do not pre-drill holes based solely on these dimensions without verifying the physical product.
Special order returns
Special order products are not eligible for return or exchange. Confirm all codes and finishes with a sales representative before ordering.
Before use
- Verify the hardware kit contains plates, nylon anchors, and steel Phillips head screws.
- Ensure you have the correct Allen key (provided) for connecting horizontal and vertical bars.
- Check the wall surface suitability for the provided nylon anchors.
- Confirm the SKU and finish code match your requirements before purchase.
Specs in practice
- Concealed Screw Mount
- The mounting hardware is hidden behind the fixture for a cleaner look.
Images and diagrams
- Technical drawings show the exact spacing required for mounting plates.
- Drawings indicate the orientation for left and right vertical bar installations.
- Dimensions are provided in both inches and millimeters.
Model compatibility
- Special order finishes (Brushed Brass, Dark Bronze, Gun Metal, Brushed Nickel, Polished Nickel) require contact with a sales representative.
- Minimum order quantities apply to special order finishes.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.