Garden / Grow Tents
VIVOSUN Grow Tent 2-in-1 Series
A comprehensive assembly and setup guide for the VIVOSUN 2-in-1 Grow Tent series. This manual covers installation steps for models VST-D325, VST-D436, VST-D548, and VST-D948, including frame assembly, tent coat installation, and...
Quick answers from the manual
Quick answer
- The VIVOSUN 2-in-1 Grow Tent is a modular indoor gardening enclosure. This manual provides assembly instructions for models VST-D325, VST-D436, VST-D548, and VST-D948, including frame construction, tent coat installation, and ventilation setup. p. 1, 2, 7, 13
Key actions
- Assemble the frame p. 7, 8, 9, 10
- Install the tent coat p. 10, 16
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Material | 600D Oxford Nylon / Mylar | Durable, reflective construction | p. 6 |
Where to find it in the PDF
- Product Contents p. 4, 5
- Installation p. 7, 8, 9, 10
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The VIVOSUN 2-in-1 Grow Tent is designed for indoor gardening, featuring a modular, light-blocking, and highly reflective design. This manual provides assembly instructions for four specific models: VST-D325, VST-D436, VST-D548, and VST-D948. Before starting, identify your specific model to ensure you follow the correct parts list and assembly steps.
Product Contents
Each kit includes the following components, though quantities vary by model:
- Tent Coat: The main enclosure fabric.
- Frame Poles & Ceiling Bars: Metal poles (labeled A-G) used to construct the structure.
- Connectors: Corner supports, four-way, and three-way connectors.
- Accessories: Floor trays, filter straps, tent divider cloth, and shelves.
Installation
The assembly process is divided into two main groups: VST-D325/D436/D548 and VST-D948. Follow these general steps:
- Base Frame: Connect the base poles and corner supports to form the bottom frame.
- Vertical Structure: Insert vertical poles into the base connectors.
- Upper Frame: Attach the upper connectors and remaining poles to complete the skeleton.
- Tent Coat: Unzip the tent coat, place the base frame inside, and pull the fabric over the frame, ensuring corners are aligned.
- Finishing: Install ceiling bars, floor trays, and the tent divider cloth. Zip the tent closed to ensure a light-tight seal.
Equipment Setup
Proper ventilation is critical for plant health:
- Ducting Openings: Use the adjustable openings to install ducting for air exchange.
- Inline Fan & Filter: Hang the inline fan on the ceiling bars and connect it to the carbon filter using ducting. Secure with provided straps.
- Intake Air: Ensure intake vents are positioned to allow fresh air flow into the tent.
Maintenance and Warranty
The tent features SBS double-covered zippers and a waterproof floor tray to prevent leakage. VIVOSUN provides a one-year warranty against defects on all grow tents purchased directly or through authorized dealers. This warranty covers material defects but does not cover misuse, abuse, or normal wear and tear.
Manufacturer information
Vivosun
Practical help
Common problems
Tent coat does not fit over the frame
Ensure the base frame is fully assembled and inside the coat before pulling the fabric up. Verify that all poles are fully inserted into the connectors.
Difficulty identifying parts
Refer to the 'Product Contents' section specific to your model (VST-D325/D436/D548 or VST-D948) to match the pole labels (A-G) and connector types.
Before use
- Verify all poles and connectors are present according to your specific model's parts list.
- Ensure you have a flat, stable surface for assembly.
- Identify your model (VST-D325, VST-D436, VST-D548, or VST-D948) to follow the correct installation steps.
- Check that the tent coat is clean and free of tears before assembly.
- Ensure you have adequate space for the tent dimensions.
Specs in practice
- 600D Oxford Nylon
- Durable, light-blocking exterior fabric.
- Mylar Interior
- Highly reflective material to maximize light efficiency for plants.
- SBS Double-Covered Zippers
- Provides a light-proof seal for the tent.
Images and diagrams
- The manual provides distinct assembly sequences for the VST-D325/D436/D548 group and the VST-D948 model.
- Steps involve building the base frame, adding vertical poles, connecting top supports, and finally pulling the tent coat over the frame.
Model compatibility
- Compatible with VIVOSUN AeroLight, AeroZesh, and GrowHub controllers.
- Ducting openings are adjustable to fit various sizes of ducting.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.