User Guide for Wagner LEVARO 18V Powerbrush

Quick guide from the manual

This document provides essential instructions for the Wagner LEVARO 18V Powerbrush. It covers the initial setup, battery installation, proper cleaning techniques, and maintenance to ensure the longevity of your device and terrace surfaces.

Device Overview

The LEVARO 18V Powerbrush features an integrated water tank, spray nozzle, and counter-rotating brushes. It is powered by the BOSCH 18V POWER FOR ALL battery system. Key components include the wet function switch, ON/OFF switch, dirt container, and storage tray.

Before you start

1. Insert the cable and attach the handle until it clicks.
2. Charge the battery fully using the BOSCH 18V POWER FOR ALL system.
3. Insert the cleaning brushes into the unit.
4. Fill the fresh water tank with water (add cleaning concentrate if required).
5. Insert the fresh water tank into the unit.
6. Insert the charged battery.
7. Insert and lock the dirt container.

Operation

• Starting: Press the release button and the ON/OFF switch simultaneously.
• Cleaning: Move the device in straight lines over the area to be cleaned.
• Edge Cleaning: The design allows for cleaning close to the edges of the terrace.
• Emptying: Regularly empty the dirt container to maintain performance.

Clean & Care

• After use, remove and clean the brushes.
• Place the unit in the storage tray for safekeeping.
• For deep cleaning, you can loosen dirt without the dirt tank, rinse it off, and perform a final passage with the dirt container attached.

Tips & Tricks

• Sectional Cleaning: Start at the back of the terrace and work systematically forwards.
• Drying Time: Allow the terrace to dry completely after wet cleaning before walking on it.
• Weather Conditions: Do not clean the terrace when it is raining or if the surface is damp.
• Profile Direction: Work in the direction of the surface profile to remove stubborn dirt from grooves.