Electronics / Monitors
User Guide for Xiaomi Pad 8
Quick start guide for the Xiaomi Pad 8 tablet, including power-on instructions, charging guidelines, safety precautions, and regulatory information.
Table of contents
Quick guide from the manual
To turn on your Xiaomi Pad 8, press and hold the power button. Follow the on-screen instructions to complete the initial device configuration.
Charging the device
For environmental reasons, a charger is not included in the package. You can charge the device using most USB power adapters and a USB Type-C cable. To achieve maximum charging speed, use a charger with an output between 10W and 45W (USB PD fast charging).
- Connect the tablet to a computer using a USB data cable.
- Use the included USB cable with a Mi brand charger and connect it to a power strip.
- Do not charge the device for more than 12 hours.
- Ensure third-party chargers comply with USB 2.0 or higher protocol standards and relevant international safety standards (IEC 60950 or IEC 62368-1).
Safety information
Operating temperature: 0°C to 40°C. Using the device outside this range may cause damage.
Battery safety: Do not attempt to replace the built-in battery yourself. Do not disassemble, hit, crush, or burn the battery. If the battery appears deformed or damaged, stop using it immediately. Do not short-circuit the battery or expose it to high temperatures.
General precautions: Keep the device dry. Do not attempt to repair the device yourself; contact authorized service centers. Maintain a minimum distance of 15 cm from medical devices like pacemakers to avoid interference. Do not use the tablet in high-humidity environments like bathrooms.
Factory reset
To erase local data (accounts, contacts, photos, apps, etc.), go to Settings > About tablet > Factory reset.
Certification and E-label
To view certification information, go to Settings > About tablet > Certification, or type "Certification" in the settings search bar.
Manufacturer information
Xiaomi Corporation
Practical help
Common problems
Device not charging or charging slowly
Ensure you are using a charger with an output between 10W and 45W. Use authorized cables and chargers compliant with USB 2.0 or higher.
Potential interference with medical devices
Maintain a minimum distance of 15 cm between the tablet and medical devices like pacemakers.
Battery appears deformed or damaged
Stop using the device immediately and contact an authorized service center.
Before use
- Ensure the device is kept dry.
- Check that the power adapter is easily accessible.
- Verify that the operating environment is between 0°C and 40°C.
- Use only authorized cables and power adapters.
Specs in practice
- Operating Temperature
- 0°C to 40°C; usage outside this range may damage the device.
- Charging Power
- 10W to 45W required for optimal USB PD fast charging.
- SAR Limit (FCC)
- 1.6 W/kg; the device is tested to ensure it does not exceed government emission limits.
Model compatibility
- Chargers must comply with USB 2.0 or higher and IEC 60950/IEC 62368-1 standards.
- Wireless charging mode is intended for desktop use only; do not carry the device while charging wirelessly.
- Maintain a 20 cm distance from persons when using wireless charging mode.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.