Documents / Warranty Safety
User Guide for ADJ Monster Duo 18W High Output Dual Lens Moonflower Effect
Quick guide for the ADJ Monster Duo 18W lighting effect, covering setup, DMX operation, master/slave configuration, system menu navigation, and maintenance.
Table of contents
Quick guide from the manual
The ADJ Monster Duo is a 2-in-1 DMX LED moonflower and strobe lighting effect. This guide covers essential setup, operation, and maintenance. Always ensure the unit is mounted securely and never look directly into the light source. For technical support, contact ADJ at 800-322-6337 or visit www.adj.com.
Safety Precautions
- Indoor use only.
- Maintain at least 6 inches (15cm) of clearance from walls for ventilation.
- Always secure the fixture with a secondary safety cable.
- Ensure the mounting surface can support at least 10 times the weight of the device.
- Disconnect from power before making any connections or performing maintenance.
System Menu Navigation
Use the MENU, ENTER, UP, and DOWN buttons to configure the device. Press ENTER to confirm settings, then press and hold the MENU button for at least 3 seconds to save and activate. The display locks after 30 seconds; hold MENU for 3 seconds to unlock.
- DMX Address: Set the DMX start address (001-512).
- Show Mode: Select from 12 factory shows or random show (0).
- Slave Mode: Configure as Slave 1 or Slave 2 for master/slave setups.
- Sound State: Toggle sound active mode On/Off.
- Sound Sense: Adjust sound sensitivity from 0 (least) to 100 (most).
- DMX State: Choose behavior upon signal loss (Master/Slave, Blackout, or Last State).
- Back Light: Toggle LCD backlight auto-off.
Operation Modes
The unit supports three primary modes: Sound Active (reacts to music), Show Mode (internal programs), and DMX Control (1-channel mode). For Master/Slave configurations, link units via DMX cables. The first unit acts as the Master, and subsequent units are set to Slave 1 or Slave 2.
Maintenance and Cleaning
Periodic cleaning is required to maintain light output, especially in environments with smoke or fog. Use glass cleaner and a soft cloth to wipe the external casing, cooling vents, and fan grill. Clean external optics every 20 days and internal optics every 30-60 days. Ensure all parts are dry before reconnecting power.
Technical Specifications
- Voltage: 100V-240V 50/60Hz (Auto-sensing)
- LEDs: 18 x 1W (4 Red, 4 Green, 4 Blue, 4 White, 2 Amber)
- DMX: 1 Channel
- Power Daisy Chain: Max 12 fixtures (120V) or 20 fixtures (240V)
Official resources from the manual
Manufacturer information
ADJ Products, LLC
Practical help
Common problems
No light output
Check if the external fuse on the rear panel has blown and ensure the fuse holder is properly seated.
Unit does not respond to sound
Ensure the sound is bass-heavy; high-pitched sounds or tapping on the microphone may not trigger the unit.
Erratic DMX behavior
Use a 110-120 Ohm terminator on the last fixture in the DMX chain and ensure cables are not split.
Before use
- Inspect shipping carton and fixture for damage.
- Ensure the mounting area can hold 10x the device weight.
- Attach a secondary safety cable.
- Verify power outlet matches required voltage (auto-sensing).
- Ensure DMX cables are 110 Ohm shielded data cables.
Specs in practice
- 1 DMX Channel
- The unit uses a single channel to control all internal shows and blackout functions.
- Auto Sensing Voltage
- The unit automatically detects and adjusts to the input voltage (100V-240V).
Model compatibility
- Compatible with standard DMX-512 controllers.
- Supports daisy-chaining power for up to 12 (120V) or 20 (240V) fixtures.
- Optional UC-IR infrared remote control available separately.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.