Lighting / LED Strips
User Manual for Aigostar 100801TYR LED Strip Light
Quick guide for the Aigostar 100801TYR LED Strip Light. Includes installation steps, safety warnings, remote control usage, and technical specifications.
Table of contents
Quick guide from the manual
This document provides essential instructions for the installation and safe operation of the Aigostar 100801TYR LED Strip Light. Ensure the power supply is disconnected before starting any installation work. The product is designed for indoor/outdoor use but must be installed by a qualified electrician in accordance with local requirements.
Package Contents
- LED strip (5m)
- 2 screws and 1 adhesive tape
- Remote control (CR2025 3V battery included)
- Power adapter
Installation Instructions
- Clean the surface where the strip will be applied to ensure proper adhesion.
- Measure the desired length.
- Cut the strip only at the marked cutting points (every 50mm).
- Peel off the protective film from the adhesive tape.
- Stick the strip in place.
- Connect the strip to the controller.
- Use the provided screws or adhesive tape to mount the controller.
- Connect the controller to the power adapter.
Remote Control and Battery
The remote control operates using a CR2025 3V button battery. If the remote stops working or the range decreases, replace the battery. Ensure the battery is inserted with the correct polarity (+/-) as indicated in the battery compartment.
Safety Warnings
- This product is not a toy; keep away from children.
- Do not immerse the product in water.
- Do not look directly into the light.
- Keep the product away from heat sources, extreme temperatures, and electrostatic interference.
- If the product is damaged, turn off the power immediately and contact a qualified electrician or service provider.
- In case of battery leakage, avoid contact with skin, eyes, and mucous membranes. Wash immediately with plenty of water if contact occurs.
Technical Specifications
- Voltage: 12V
- Power: 1.8W
- Color Temperature: 3000K
- Luminous Flux: 185lm
- Battery Type: CR2025 3V
Manufacturer information
Aigostar
Practical help
Common problems
Remote control is not responding
Check if the CR2025 battery is installed correctly with the right polarity. Replace the battery if it is depleted.
LED strip does not stick to the surface
Ensure the mounting surface is clean, dry, and free of dust or grease before applying the adhesive tape.
Before use
- Ensure the power supply is disconnected before installation.
- Verify the mounting surface is clean and dry.
- Check that the CR2025 battery is properly installed in the remote.
- Identify the marked cutting points (every 50mm) before shortening the strip.
- Confirm all components (adapter, controller, strip) are present.
Model compatibility
- Use only the provided power adapter.
- The remote control uses a standard CR2025 3V button battery.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.