Electronics / Headphones Earbuds
User Manual for Anko Warming Tray 23007C2
Quick guide for the Anko 23007C2 Warming Tray. Learn how to operate, clean, and maintain your appliance safely with this user manual summary.
Quick answers from the manual
Quick answer
- The Anko 23007C2 is a warming tray with two heat settings (80°C and 120°C). It is intended for indoor household use on flat, stable surfaces. p. 4
Key actions
- Operating the tray p. 4
- Cleaning the tray p. 5
First start
- Clean the appliance before first use and expect a slight odor during the first operation. p. 4
Show 3 more answers Show less
Maintenance and reset
- Ensure the control switch is in 'O' position and the unit is disconnected from mains power before cleaning. p. 5
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Voltage | 220-240V~ 50-60Hz | Operating voltage range | p. 5 |
| Power | 200W | Power consumption | p. 5 |
Where to find it in the PDF
- Product Overview p. 4
- Safety Instructions p. 2, 3
- Cleaning and Maintenance p. 5
Table of contents
Quick Guide
The Anko 23007C2 Warming Tray is designed for household use to keep food warm. Before using, ensure the appliance is placed on a flat, clean, and non-slippery surface. Always ensure the control switch is in the 'O' (off) position before plugging the unit into a power outlet.
Safety Precautions
- Do not immerse the warming tray or plug in water or other liquids.
- Do not touch the surface while in use as it becomes hot.
- Keep away from children and ensure they do not play with the appliance.
- Do not use outdoors or near washbasins/sinks.
- Do not place on or near hot gas, electrical burners, or in a heat oven.
- Unplug the unit when not in use and before cleaning.
- Do not use if the surface is cracked.
- Intended for countertop use only.
Operation Instructions
1. Place the product on a horizontal desktop.
2. Plug the removable power cord into the unit, then plug the unit into an electrical power outlet. Ensure the control switch is in the 'O' position before plugging in.
3. Press the control switch to position 'I' or 'II'. The indicator light will turn on, and the tray will begin to heat up.
- Level I: Heats up to approximately 80°C.
- Level II: Heats up to approximately 120°C.
4. Place food in a plate or dish on the warming tray surface.
5. To stop heating, press the control switch to 'O'.
Cleaning and Maintenance
Before cleaning, ensure the unit is switched off ('O') and disconnected from the power supply. Allow the unit to cool down completely.
- Wipe the warming tray base with a damp and/or soapy cloth.
- The warming tray is not dishwasher safe.
- Do not immerse the unit in water.
- Remove food residue immediately after the surface has cooled to prevent it from drying on the surface.
- Store in a clean, dry place.
Technical Data
- Voltage: 220-240V~ 50-60Hz
- Power: 200W
Manufacturer information
Anko
Practical help
Common problems
Slight odor during first use
This is normal and no cause for concern.
Food dries out or changes flavor
Do not keep food on the Warming Tray for an extended period.
Before use
- Ensure the control switch is in the 'O' position.
- Place the appliance on a flat, clean, and non-slippery surface.
- Clean the appliance according to the maintenance instructions.
- Ensure the power cord is securely plugged into the unit.
Show more Show less
Images and diagrams
- 1. Power cord
- 2. Warming surface
- 4. Control switch
- 5. Indicator light
Model compatibility
- Intended for household use only.
- Not for outdoor use.
- Not dishwasher safe.
Manual page author
Emily Carter
User documentation editor