Furniture / Storage Cabinets
Assembly Instructions for Anrex Olivia 1DG Cupboard
A comprehensive assembly and maintenance guide for the Anrex Olivia 1DG Cupboard. Includes safety warnings, parts list, and step-by-step installation instructions.
Quick answers from the manual
Quick answer
- The Anrex Olivia 1DG Cupboard should be assembled according to the diagrams on page 3. Ensure it is placed away from heat sources and damp walls, and maintain room humidity below 70%. p. 1, 2, 3
Key actions
- Periodically tighten loose screw connections. p. 1, 2
- Clean with a slightly damp soft cloth. p. 1, 2
First start
- Check completeness at the store upon purchase. p. 1, 2
Maintenance and reset
- Tighten screws and clean with a damp cloth. p. 1, 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Warranty | 24 months | Manufacturer guarantee period from date of sale. | p. 1, 2 |
Where to find it in the PDF
- Assembly Diagrams and Parts List p. 3
Table of contents
Quick guide from the manual
The Anrex Olivia 1DG Cupboard is part of the Olivia furniture collection. Before assembly, check the product quality and completeness at the store. During use, periodically tighten all screw connections to ensure stability. If you need to move the furniture, remove all contents and lift the unit to avoid damaging the supports.
Safety warnings
- Do not install furniture near heating devices or against damp walls.
- Ensure the room relative humidity is below 70%.
- Do not expose furniture elements to temperatures above +40°C.
- Do not step on horizontal shields or windows during assembly or use.
- Do not use chemical cleaners for maintenance.
- Avoid direct contact with water.
- Do not install furniture in direct sunlight to prevent warping and discoloration.
Maintenance
Dust the product using a slightly damp, soft cloth. Avoid using abrasive or chemical cleaning agents. Periodically check and tighten all screw connections.
Assembly instructions
Refer to the parts list and exploded view diagram on page 3 for assembly. The product includes various hardware components (A1, A2, G, etc.) and panels numbered 1 through 25. Ensure all parts are present before beginning assembly. It is recommended to use qualified specialists for assembly.
Warranty
The manufacturer provides a 24-month warranty from the date of sale, covering repair or replacement if operating rules are followed. The service life of the furniture is 5 years. Claims should be made to the trading organization where the furniture was purchased, presenting this manual and the sales receipt.
Practical help
Common problems
Loose screw connections
Periodically tighten all screw connections during the operation of the furniture.
Moving the furniture
Completely empty the unit (e.g., remove mattress) and lift the product to avoid damaging the supports.
Before use
- Check product quality and completeness at the store upon purchase.
- Verify all parts against the parts list on page 3.
- Ensure the installation area is not near heating devices or damp walls.
- Confirm room humidity is below 70%.
Specs in practice
- Warranty Period
- 24 months from the date of sale.
- Service Life
- 5 years.
- Max Temperature
- Furniture elements should not be heated above +40°C.
Images and diagrams
- Page 3 contains the exploded view diagram showing the assembly sequence.
- Parts are identified by numbers (1-25) corresponding to the dimensions table.
- Hardware components are labeled with codes (e.g., A1, A2, G) and quantities.
Model compatibility
- Part of the 'OLIVIA' furniture collection.
- Additional shelves are available for purchase.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.