Furniture / Bedroom Furniture
Assembly Manual for Anrex Monako Storage Cabinet
Comprehensive assembly and maintenance guide for the Anrex Monako collection, including models 1V1D1SL, 2V1SL, and 2D1SL. Includes safety warnings, assembly diagrams, and warranty information.
Quick answers from the manual
Quick answer
- This manual provides assembly instructions for the Anrex Monako furniture collection (1V1D1SL, 2V1SL, 2D1SL). It includes safety guidelines, maintenance tips, and warranty information. p. 1, 2
Key actions
- Periodically tighten screw connections. p. 2
- Remove all contents before moving the furniture. p. 2
Problems and fixes
Loose screws
Tighten the connections.
p. 2Maintenance and reset
- Dust with a slightly damp soft cloth. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Warranty | 24 months | Warranty period from date of sale. | p. 2 |
| Lifetime | 5 years | Expected product lifetime. | p. 2 |
Where to find it in the PDF
- Safety and Warranty p. 1, 2
- Assembly Diagrams p. 3
- Parts List p. 4
Table of contents
Manual images
Click an image to enlargeImportant Information
This document provides assembly instructions for the Anrex Monako furniture collection, including models 1V1D1SL, 2V1SL, and 2D1SL. It is essential to check the completeness of the product upon purchase and follow the assembly steps precisely as described to ensure stability and safety.
Safety and Prohibitions
To ensure the longevity of your furniture and maintain safety, observe the following restrictions:
- Do not install furniture near heating devices or against damp walls.
- Do not place furniture in rooms with relative humidity exceeding 70%.
- Do not allow furniture elements to heat up above +40°C.
- Do not step on horizontal panels or windows during assembly or use.
- Do not use chemical cleaning agents.
- Avoid direct contact with water.
Assembly Instructions
The assembly process is divided into four main stages (I, II, III, IV) as illustrated in the manual. Ensure you have all hardware components listed in the parts list before beginning. Use the provided diagrams to identify the correct placement of panels and fasteners.
- Preparation: Unpack the furniture and verify all parts against the included list.
- Assembly: Follow the diagrams labeled I through IV. Ensure all screw connections are secure.
- Moving: If moving the furniture, remove all contents (including mattresses if applicable) and lift the unit to prevent damage to the supports.
Maintenance and Care
Regular maintenance is required to keep the furniture in good condition:
- Tightening: Periodically check and tighten all screw connections, as they may loosen during service.
- Cleaning: Dust the product using a slightly damp, soft cloth. Avoid harsh chemicals.
- Sunlight: Do not install furniture in direct sunlight to prevent warping and discoloration.
Warranty
The manufacturer provides a 24-month warranty from the date of sale, covering repair or replacement if operating rules have not been violated. Claims should be made directly to the retailer with the purchase receipt and this manual.
Practical help
Common problems
Loose screw connections
Periodically check and tighten all screws during the service life of the furniture.
Moving the furniture
Remove all contents (e.g., mattress) and lift the unit to avoid damaging the supports.
Warping or discoloration
Do not install the furniture in direct sunlight or near heating devices.
Before use
- Check the quality and completeness of the product immediately after unpacking.
- Ensure the room humidity is below 70%.
- Verify that the installation location is not near heating devices or damp walls.
- Ensure you have the necessary tools for assembly.
- Keep the instruction manual for future reassembly or warranty claims.
Specs in practice
- Warranty Period
- 24 months from the date of sale.
- Product Lifetime
- 5 years.
- Max Temperature
- Furniture elements should not be heated above +40°C.
Images and diagrams
- Diagram I: Initial frame assembly and base connection.
- Diagram II: Upper structure and shelf installation.
- Diagram III: Back panel and structural reinforcement.
- Diagram IV: Door installation and final adjustments.
Model compatibility
- The manual applies to the Monako collection: 1V1D1SL, 2V1SL, and 2D1SL.
- Furniture meets GOST 16371-2014 and TR TS 025/2012 standards.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.