Lighting / Fixtures
User Manual for Anslut 004678 Ceiling Lamp
Quick guide for the Anslut 004678 ceiling lamp. Includes installation steps, safety warnings, technical specifications, and maintenance tips for safe operation.
Table of contents
Quick guide from the manual
This document provides essential instructions for the installation and safe operation of the Anslut 004678 ceiling lamp. Always ensure the power is disconnected before performing any installation or maintenance work. This product is intended for indoor use only.
Safety instructions
- The lamp is intended for indoor use only.
- Keep out of the reach of children.
- Do not connect the lamp to the mains while it is still in the packaging.
- Ensure all electrical connections comply with local regulations.
- Do not overload the mains supply.
- Do not store or use the lamp in damp, very cold, or very hot environments, as this can damage the electronics.
- The lamp electronics are sensitive to knocks and blows; avoid dropping the unit.
- Do not attempt to replace damaged electrical cables yourself.
- Never use the lamp without the glass cover installed.
- New installations and extensions to existing systems must always be carried out by an authorized electrician.
Technical data
- Rated voltage: 230 V ~ 50 Hz
- Output: Max. 60 W
- Socket: E27
- Protection class: II (Double insulated)
- Protection rating: IP20
- Dimensions: Ø 28.5 x 7.5 cm
Description of parts
- Plug
- Ceiling light base
- Screw
- Light source
- Glass cover
- Retaining screws for glass
Installation
- Release the glass cover from the ceiling light.
- Mark the location where the ceiling light is to be installed.
- Drill mounting holes, taking care not to damage any recessed cables or conduits.
- Connect the power cables to the terminal block in the ceiling light.
- Secure the ceiling light base to the ceiling using the provided screws.
- Replace the glass cover on the ceiling light and secure it with the retaining screws.
Manufacturer information
Anslut
Practical help
Common problems
Light does not turn on
Check if the bulb is properly screwed into the E27 socket and ensure the power supply is connected correctly.
Glass cover is loose
Ensure the retaining screws are tightened securely to the base.
Before use
- Ensure the power is switched off at the mains before starting installation.
- Verify that the mounting surface can support the weight of the lamp.
- Check that the bulb wattage does not exceed the maximum of 60W.
- Ensure the installation area is dry and not subject to extreme temperatures.
- Confirm that all electrical connections are made by a qualified person if required by local regulations.
Images and diagrams
- The installation diagram illustrates the assembly sequence: wall plugs (1), base (2), screws (3), light source (4), glass (5), and retaining screw (6).
Model compatibility
- Designed for indoor use only.
- Requires an E27 bulb (max 60W).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.