Lighting / Fixtures
Artemide Algoritmo System Recessed Structural Module 1184mm Data Sheet
Technical data sheet for the Artemide Algoritmo System 1184mm recessed structural module. Includes dimensions, installation specifications, and compatible accessories.
Table of contents
Quick guide from the manual
This document provides technical specifications and accessory information for the Artemide Algoritmo System 1184mm recessed structural module. It is intended for planning and installation purposes.
Product Description
The Algoritmo System is a modular lighting solution designed for ceiling or wall-recessed installation. It can be installed as a continuous line or with angles. The system is composed of structural modules in extruded aluminium, featuring pre-wired gear plates with through-wiring and a quick-connection system for optics and components. It is designed for diffused emission, wall washer light, prismoptic or controlled emission, and supports projector integration (PAD or Cube 37) and 3-phase track alimentation. The product complies with standard EN60598-1.
Technical Specifications
- Product Code: M204800
- Length: 1180 mm
- Cutout Width: 62 mm
- Cutout Depth: 85 mm
- Weight: 1.8 kg
- Material: Extruded Aluminium
- Installation Type: Recessed
- Color: Anodized Glossy
Accessories
The following accessories are available for the system:
- 90° Joint (M196600): Used for the mechanical connection of 2 modules on the same plane (Trimless). Must be ordered with the kit cover angle (cod. AE44001 / AE44004).
- End Cap (M197300): Set of 2 end caps for finishing the system.
Manufacturer information
Artemide S.p.A.
Practical help
Common problems
Incorrect cutout dimensions
Ensure the installation surface is prepared with a width of 62mm and a depth of 85mm to accommodate the module.
Mechanical connection issues
When connecting modules at 90 degrees, ensure you have the correct 90° joint (M196600) and the required kit cover angle (AE44001 / AE44004).
Before use
- Verify the installation surface supports recessed mounting.
- Confirm the cutout width is exactly 62mm.
- Confirm the cutout depth is at least 85mm.
- Ensure all necessary accessories (joints, end caps) are ordered alongside the structural module.
- Check that the power supply requirements match the 3-phase track alimentation if using projectors.
Specs in practice
- Cutout Width (62mm)
- The required width of the opening in the ceiling or wall for the module to fit.
- Cutout Depth (85mm)
- The required depth of the cavity behind the surface for the module housing.
- Length (1180mm)
- The physical length of the structural module.
Images and diagrams
- The profile diagram illustrates the cross-section of the recessed module, highlighting the dimensions required for the installation cutout.
Model compatibility
- Compatible with PAD or Cube 37 projectors.
- Designed for 3-phase track alimentation.
- Requires specific kit cover angle (AE44001 / AE44004) when using the 90° joint.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.