HVAC / Parking Heaters
Spare Parts Catalogue for Autoterm Flow 14D Liquid Heater
Official spare parts catalogue for the Autoterm Flow 14D liquid heater. This guide provides detailed exploded-view diagrams and comprehensive parts lists for the installation kit and internal heater components to assist with maintenance...
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document is the official spare parts catalogue for the Autoterm Flow 14D liquid heater. It is intended for companies and individuals involved in the installation, repair, and maintenance of the unit. The catalogue provides visual schematics and corresponding parts lists to help identify components and facilitate the ordering of replacement parts.
Installation Kit
The installation kit includes all necessary components for setting up the heater. Refer to Figure 1 for the visual layout of these parts. Table 1 provides the detailed list of items, including wiring harnesses, fuel pumps, exhaust pipes, the control panel (PU-27TM2), fuel tank, and various mounting hardware. Always check the 'Notes' column in the table to ensure you select the correct version (e.g., 12V vs 24V) for your specific unit.
Heater Spare Parts
Figure 2 provides a schematic of the heater's internal spare parts. Table 2 lists these components, which include the air pump, control unit, combustion chamber, glow plug, and various seals and gaskets. Use this section to identify internal parts required for repairs.
Ordering Replacement Parts
If a part fails during the use of the heater, locate the part in the diagrams (Figure 1 or Figure 2) and find its corresponding designation in the tables. Use the manufacturer's specific part numbers listed in the tables when contacting the manufacturer or an authorized dealer to order replacements.
Contact Information
Manufacturer: ADVERS LLC. Representative office: AUTOTERM LLC, Paleju 72, Marupe, Latvia, LV-2167. Warranty Department: [email protected]. Technical Support: [email protected]. Website: www.autoterm.com.
Official resources from the manual
Practical help
Common problems
Need to order a replacement part
Identify the part in Figure 1 or Figure 2, find its number in the corresponding table, and use the specific manufacturer part number for ordering.
Unsure which electrical component version is needed
Check the 'Notes' column in the parts tables, which specifies voltage requirements (12V or 24V) for items like the heater unit, air pump, and control unit.
Before use
- Verify the heater model (Flow 14D) before ordering parts.
- Consult the installation kit diagram (Figure 1) for assembly reference.
- Consult the heater schematic (Figure 2) for internal component reference.
- Use the manufacturer's part numbers from the tables for accurate ordering.
Images and diagrams
- Figure 1: Exploded view of the installation kit components.
- Figure 2: Exploded view of the heater's internal spare parts.
Model compatibility
- This catalogue is specific to the Autoterm Flow 14D liquid heater.
- Some parts vary based on voltage (12V vs 24V); always verify the 'Notes' column in the tables.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.