Home Appliances / Personal Care
User Manual for BaByliss 2165CE Hair Crimper
Quick guide for the BaByliss 2165CE hair crimper. Learn how to use, adjust heat settings, clean, and maintain your device safely.
Quick answers from the manual
Quick answer
- The BaByliss 2165CE is a hair crimper. To use, press 'I' to turn on, select the heat setting, place a section of hair between the plates, hold for 5-8 seconds, and press '0' to turn off. p. 1
Key actions
- Turn off p. 1
First start
- Plug in, press 'I', select heat, wait for lights to stop flashing, style hair. p. 1
Show 3 more answers Show less
Maintenance and reset
- Do not wrap the cord tightly around the device; coil it loosely. Unplug after use. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Auto Shut Off | 72 minutes | Automatic safety shutdown | p. 1 |
Where to find it in the PDF
- Instructions p. 1, 2
Table of contents
Quick guide from the manual
The BaByliss 2165CE is a hair crimper designed for styling hair. Always ensure the device is used on dry, combed hair and avoid contact with skin, ears, eyes, face, and neck due to high temperatures.
How to use
- Ensure hair is dry and combed through to remove tangles. Divide hair into sections.
- Press the button marked 'I' to switch on. Both red and green lights will flash.
- Rotate the temperature dial to select a heat setting suitable for your hair type.
- Wait for the lights to stop flashing, indicating the selected temperature has been reached.
- Insert a section of hair between the crimping plates and position them where you want the style to start.
- Close the plates firmly and hold for 5-8 seconds, depending on your hair type.
- Release the appliance from the hair and repeat as desired.
- After use, press the button marked '0' to switch off and unplug the appliance.
- Allow the appliance to cool before storing.
Heat settings
Always perform a test on initial use to ensure the correct temperature for your hair type. Start on the lowest setting and increase as needed.
- Min – 2: 120°C – 130°C
- 2 – 4: 130°C – 150°C
- 4 – 6: 150°C – 170°C
- 6 – 8: 170°C – 190°C
- 8 – Max: 190°C – 210°C
Auto shut off
For safety, the appliance features an automatic shut-off function. It will turn off automatically if left on for more than 72 minutes continuously. To continue using, press the 'I' button to turn it back on.
Cleaning and maintenance
To keep the appliance in the best condition:
- Do not wrap the power cord tightly around the appliance. Coil it loosely beside the device.
- Do not use the appliance if the cord is stretched tight from the power point.
- Always unplug the device after use.
- Allow the device to cool completely before storing.
Practical help
Common problems
Device does not heat up
Ensure it is plugged in and the 'I' button is pressed.
Hair not styling effectively
Ensure hair is dry and combed. Try a higher heat setting if hair is thick.
Before use
- Ensure hair is dry and combed through.
- Check that the device is plugged into a power outlet.
- Select the appropriate heat setting for your hair type.
Show more Show less
Specs in practice
- Auto Shut Off
- The device turns off automatically after 72 minutes of continuous use for safety.
Model compatibility
- Suitable for various hair types; use lower settings for delicate/fine hair and higher settings for thicker hair.
Manual page author
Emily Carter
User documentation editor