Home Appliances / Personal Care
User Guide for BaByliss Curl Styler Luxe 2112U
Quick guide for the BaByliss Curl Styler Luxe 2112U. Learn how to use heat settings, operate the cool-air function, and maintain your styler safely.
Quick answers from the manual
Quick answer
- To use the BaByliss Curl Styler Luxe, hold the power button for 1-2 seconds to turn it on. Select your heat setting (I, II, or III), place a section of hair between the plates, wrap the hair by turning the device 180 degrees, and glide downwards. p. 4, 5
Key actions
- Turn on/off p. 4, 5
- Select heat setting p. 4, 5
- Toggle cool-air function p. 4, 6
First start
- Ensure hair is dry and combed. Hold power button for 1-2 seconds to start. The device defaults to medium heat (II). p. 4
Show 4 more answers Show less
Problems and fixes
Appliance shuts off
It has an automatic 60-minute shut-off. Press and hold the power button to restart.
p. 3, 6Maintenance and reset
- Unplug after use, allow to cool, and coil the lead loosely by the side of the appliance. p. 3, 6
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Heat Setting I | 160°C | Lowest heat setting | p. 5 |
| Heat Setting II | 180°C | Medium heat setting | p. 5 |
| Heat Setting III | 200°C | Highest heat setting | p. 5 |
Where to find it in the PDF
- Safety Cautions p. 1, 2, 3
- Instructions for Use p. 4, 5
- Care & Maintenance p. 6
- Guarantee p. 7, 8
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The BaByliss Curl Styler Luxe 2112U is a hair styling appliance featuring an automatic cool-air function to set curls. To turn the device on or off, press and hold the power button for 1-2 seconds. The device automatically defaults to the medium heat setting (II) upon startup. Always ensure hair is dry and combed before use. The appliance includes an automatic shut-off feature after 60 minutes of continuous use.
Safety Precautions
- Burn Hazard: The appliance gets extremely hot. Keep out of reach of children during use and while cooling.
- Water Safety: Do not use near bathtubs, showers, or basins. Do not immerse in water. If used in a bathroom, unplug after use.
- Damage Check: Inspect the appliance and lead for damage before every use. Do not use if damaged.
- Handling: Only hold the handle during use. Avoid contact with skin, eyes, ears, face, and neck.
Usage Instructions
- Ensure hair is dry and combed through to remove tangles. Divide hair into sections.
- Press and hold the power button for 1-2 seconds to turn the appliance on.
- Select the desired heat setting by pressing the power button until the indicator light shows the preferred temperature.
- Separate a section of hair. Press and hold the button nearest the barrel to open the plates.
- Place the hair section between the plates, roughly 2 inches from the roots. Release the button to secure the hair.
- Hold the handle in one hand and the cool tips in the other. Turn the appliance 180 degrees so the hair wraps around the outside.
- Slowly glide the appliance along the length of the hair from root to tip in a downward motion.
- Release the appliance; the cool-air outlet will instantly set the curl.
Heat Settings
Adjust the temperature based on your hair type:
- I: 160°C (for delicate, fine, bleached, or coloured hair)
- II: 180°C
- III: 200°C (for thicker hair)
It is recommended to perform a test on initial use to ensure the correct temperature is used.
Cool-Air Function
The cool-air function activates automatically once the selected temperature is reached. You will hear fan noise when this is active. To turn the cool-air function off or back on, press the power button twice in short succession.
Care and Maintenance
- Always unplug the appliance after use.
- Allow the appliance to cool completely before storing.
- Do not wrap the lead around the appliance; coil it loosely by the side.
- Do not use the appliance at a stretch from the power point.
Practical help
Common problems
Appliance does not turn on
Ensure the power button is pressed and held for 1-2 seconds.
Cool-air function is not working
The function activates automatically once the selected temperature is reached. You can toggle it by pressing the power button twice in short succession.
Hair is not curling effectively
Ensure hair sections are not too large. Smaller sections create tighter curls, while larger sections create looser curls.
Appliance shuts off unexpectedly
The device has an automatic shut-off feature after 60 minutes of continuous use. Press and hold the power button to turn it back on.
Before use
- Ensure hair is dry and combed through.
- Inspect the appliance and lead for any signs of damage.
- Check that the voltage supply matches the product requirements.
- Place the appliance on a heat-resistant surface.
- Ensure the area is free from water or other liquids.
Show more Show less
Specs in practice
- Auto Shut Off
- Safety feature that turns the device off after 60 minutes of continuous use.
Images and diagrams
- Fig 1: Shows how to open the plates and place a section of hair between them.
- Fig 2: Demonstrates turning the appliance 180 degrees to wrap the hair around the barrel.
- Fig 3: Illustrates the downward gliding motion to set the curl.
Model compatibility
- UK Only: Must not be used in the bathroom.
- Outside UK: If used in a bathroom, unplug after use due to proximity to water.
Manual page author
David Miller
Documentation analyst