Assembly Instructions for Bed Bath And Beyond 194S8349BEG-2 Double Reclining Love Seat

Important information from the manual

Before beginning assembly, please note that power tools should not be used. Using power tools increases the risk of over-tightening, which can lead to splitting or cracking the wood frame. Ensure you have all components listed below before starting.

Component list

• A: Seat (1 PC)
• B: LSF (Left Side Facing) Back Rest (1 PC)
• C: RSF (Right Side Facing) Back Rest (1 PC)

Assembly instructions

Step 1: Attaching the back rests

1. Position the Seat (A) on a flat surface.
2. Align the LSF Back Rest (B) and RSF Back Rest (C) with the metal brackets located on the rear of the Seat (A).
3. Slide the back rests down onto the brackets until they are securely locked in place.

Step 2: Finalizing assembly

1. Secure the velcro flaps at the rear of the unit to ensure a clean finish.
2. Locate the reclining handles on the sides of the love seat. Pull the handle to activate the reclining mechanism.
3. Ensure the storage bags are positioned correctly on the sides.

Care instructions for PU furniture

To maintain the original appearance of your PU furniture, follow these guidelines:

• Avoid environmental damage: Do not expose the furniture directly to sunlight or heating and air conditioning outlets, as this will fade or damage the PU material.
• Cleaning: Vacuum or wipe the surface with a soft cloth to remove dust.
• Maintenance: Hardware may loosen over time. Periodically check all connections and re-tighten if necessary.
• Floor protection: It is recommended to install protective pads under all legs and supports when using the furniture on wooden floors, hard surfaces, or carpets to prevent scratches and discoloration.