Furniture / Beds Mattresses
IKEA ÄNGOM 2-Seat Sofa Bed Assembly Guide
A comprehensive assembly and usage guide for the IKEA ÄNGOM 2-seat sofa bed, including step-by-step construction, mattress preparation, and conversion instructions.
Table of contents
Manual images
Jump to the sectionQuick guide from the manual
This document provides assembly instructions for the IKEA ÄNGOM 2-seat sofa bed. It is essential to assemble the product on a soft surface to prevent damage. The assembly requires two people for safe handling and proper alignment of the frame components.
Assembly and Installation
The assembly process involves connecting the metal frame sections, attaching the legs, and securing the upholstery. Follow these steps:
- Frame Assembly: Connect the main frame sections using the provided screws (145660). Ensure all connections are tightened securely.
- Leg Attachment: Install the support legs to the frame structure as indicated in the diagrams.
- Upholstery: Carefully attach the fabric covers to the frame, ensuring all hook-and-loop fasteners are aligned and secured.
- Mattress Preparation: The mattress is supplied rolled. After unpacking, allow 72 hours for the mattress to expand to its full shape before use.
Conversion to Bed
To convert the ÄNGOM sofa into a bed:
- Remove the back cushions.
- Pull the handle located at the front of the sofa base.
- Extend the base fully to create the sleeping surface.
Safety and Maintenance
Always ensure the sofa is placed on a level surface. Periodically check that all screws are tightened to maintain structural integrity. When unpacking the mattress, use caution with cutting tools to avoid damaging the fabric.
Manufacturer information
IKEA
Practical help
Common problems
Mattress is flat or misshapen after unpacking.
The mattress is vacuum-packed and requires up to 72 hours to fully expand to its intended shape.
Difficulty aligning frame parts during assembly.
Ensure you are working on a flat surface and have a second person to help hold the frame sections in place while tightening screws.
Before use
- Verify all 16 screws (145660) are present.
- Ensure the hex key is available.
- Assemble on a rug or soft surface to avoid scratching the frame.
- Allow 72 hours for the mattress to expand.
- Check that all fabric fasteners are securely attached.
Images and diagrams
- The manual uses icons to indicate that two people are required for assembly.
- Warning icons indicate incorrect assembly methods (e.g., wrong screw orientation or missing parts).
- The scissors icon with a cross indicates that you should not use sharp tools to open the mattress packaging to avoid cutting the fabric.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.