Furniture / Chairs & Seating
Assembly Instructions for Bed Bath and Beyond Modular Furniture
Comprehensive assembly guide for Bed Bath and Beyond modular furniture series, including the Chair with One Arm, Armless Chair, and Corner Seat. Includes parts lists, step-by-step installation instructions, and care tips.
Quick answers from the manual
Quick answer
- This manual provides assembly instructions for the Bed Bath and Beyond modular furniture series, including the Chair with One Arm (194S9557BUE-C1A), Armless Chair (194S9557BUE-AC), and Corner Seat (194S9557BUE-CR). p. 1, 5, 9
Key actions
- Attach legs to the seat frame. p. 1, 6, 10
- Attach backrests and armrests using Allen bolts. p. 2, 6, 10
- Connect modular pieces using clamps. p. 4, 8, 12
Maintenance and reset
- Wipe gently with a damp soft cloth to remove dust, dirt and any grime build-up. p. 3, 7, 11
Where to find it in the PDF
- Chair with One Arm Assembly p. 1, 2, 3, 4
- Armless Chair Assembly p. 5, 6, 7, 8
- Corner Seat Assembly p. 9, 10, 11, 12
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This manual provides assembly instructions for the Bed Bath and Beyond modular furniture series. The document covers three specific modules: the Chair with One Arm, the Armless Chair, and the Corner Seat. Each module requires assembly of legs, backrests, and cushions, and can be connected to other pieces using the provided clamps.
Parts and components
Each module comes with a specific set of parts. Before beginning assembly, verify all components against the parts list provided on the first page of the section corresponding to your specific model (194S9557BUE-C1A, 194S9557BUE-AC, or 194S9557BUE-CR). Ensure you have the provided Allen key, bolts, washers, and clamps.
Assembly instructions
Assembly generally follows these steps for all modules:
- Preparation: Unpack all components and hardware. Identify the seat frame and legs.
- Leg Installation: Attach the plastic legs to the bottom of the seat frame using the provided washers.
- Backrest and Armrest Installation: Attach the backrests and armrests to the seat frame using the specified Allen bolts, flat washers, and lock washers. Use the provided Allen key to tighten all connections securely.
- Cushion Placement: Place the back cushions onto the assembled frame.
- Connecting Modules: If creating a larger configuration, use the provided clamps to securely connect the individual modular pieces together.
Care instructions
To maintain the original appearance of your fabric furniture, please follow these simple care procedures:
- Avoid exposing furniture directly to sunlight, heating, or air conditioning outlets, as this will cause the fabric to fade or become damaged.
- Wipe the furniture gently with a damp soft cloth to remove dust, dirt, and any grime build-up.
Practical help
Common problems
Unstable furniture
Ensure all legs are tightened securely to the seat frame and that all bolts connecting the backrest/armrest are fully tightened.
Difficulty connecting modules
Ensure the provided clamps are correctly aligned and inserted into the designated slots on the seat frames.
Before use
- Verify all parts against the list on page 1 of the specific module section.
- Ensure you have the provided Allen key (M5*100*50mm).
- Clear a large enough space for assembly.
- Do not overtighten bolts to avoid damaging the frame.
- Check that all washers are used as indicated in the diagrams.
Specs in practice
- Allen Bolt M8*50
- Longer bolt used for primary structural connections.
- Allen Bolt M8*35
- Shorter bolt used for secondary connections.
Images and diagrams
- The diagrams show the assembly sequence for each specific module.
- Dotted lines indicate the alignment of parts before fastening.
- Arrows indicate the direction of assembly or connection.
Model compatibility
- The furniture is modular and designed to be connected using the provided clamps.
- Ensure you are following the correct section for your specific model (Chair, Armless Chair, or Corner Seat).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.