Assembly Instructions for Bed Bath and Beyond 194S9209 Series Furniture

Important Information

Before beginning assembly, please note the following:

• Do not use power tools for assembly. Power tools increase the risk of over-tightening, which can lead to splitting or cracking the wood.
• All parts, including the backrest, arms, and support bar, are packed in the bottom of the seat.
• It is recommended to install protective pads under all legs if the furniture is placed on wooden floors, hard surfaces, or carpets to prevent scratches and discoloration.

Parts List

Ensure you have all the following components before starting:

• A: Seat
• B: LSF Armrest
• C: RSF Armrest
• D: Back rest
• E: Plastic Legs (4 pcs)
• F: Support bar
• G: Bolts, Spring washer, Washer (2 sets)
• H: Allen key

Assembly Instructions

The assembly process is consistent across the 194S9209 series (Chair, Love Seat, Sofa). Follow these steps:

Step 1: Unpacking

Remove the backrest, arms, and support bar from the bottom of the seat base.

Step 2: Attaching Legs

Attach the four plastic legs (E) to the bottom of the seat base.

Step 3: Attaching Armrests

Align and attach the LSF Armrest (B) and RSF Armrest (C) to the sides of the seat base (A).

Step 4: Installing Support Bar

Secure the support bar (F) between the armrests using the provided bolts and washers (G) and the Allen key (H).

Step 5: Attaching Backrest

Slide the backrest (D) into the slots on the armrests until it is securely in place.

Step 6: Finalizing

Ensure all connections are tight and secure the fabric cover underneath the seat.

Care Instructions

To maintain the appearance of your linen-like furniture:

• Avoid exposing the furniture directly to sunlight, heating, or air conditioning outlets, as this may cause fading or damage.
• Do not place the furniture too close to windows, radiators, or vents. Use window treatments to block direct sunlight.
• Vacuum or wipe with a cloth regularly to remove dust.