Electronics / Audio Mixers
User Manual for Behringer MS16 Monitor System
Quick guide for the Behringer MS16 active monitor system. Includes setup instructions, control layout, connection guide, and technical specifications.
Table of contents
Quick guide from the manual
The Behringer MS16 is an active personal monitor system. To set up the system, connect the left and right speakers using the included speaker cable. Connect your audio sources to the appropriate inputs on the rear panel, connect the power cable, and use the front panel controls to adjust the sound. Ensure the mains voltage matches your region before plugging in the device.
Controls
The front panel of the MS16 features the following controls:
- Microphone Input: 1/4 inch TRS connector for dynamic microphones.
- Mic Level: Adjusts the volume of the microphone.
- Bass: Adjusts the low-frequency response.
- Treble: Adjusts the high-frequency response.
- Volume: Adjusts the overall volume level of the connected devices.
- Phones: 1/8 inch TRS output for monitoring via headphones.
- Power: Switch to turn the unit on or off.
- Power LED: Indicates when the unit is powered on.
Setup and Connections
Follow these steps to connect your equipment:
- Speaker Connection: Connect the left and right speakers using the provided speaker cable. Insert the cable into the Speaker to Left connector on the left speaker and the Speaker from Right connector on the right speaker.
- Audio Inputs: Use Input 1 (1/8 inch TRS) for CD or MD players. Use Input 2 (RCA) for soundcards, keyboards, or expanders.
- Power: Connect the AC power cable to the AC Power input. Ensure the mains voltage is compatible with your local power supply (120V, 230V, or 100V).
Specifications
The MS16 monitor system features the following technical specifications:
- Output Power: 2 x 8 Watts.
- Frequency Response: 80 Hz to 20 kHz.
- Tweeter: 38 mm (1.5 inch), 4 Ohm.
- Woofer: 100 mm (4 inch), 4 Ohm.
- Inputs: Mic (1/4 inch TRS), Input 1 (1/8 inch TRS), Input 2 (RCA).
- Dimensions: 241 x 140 x 150 mm.
- Weight: 4 kg (8.8 lbs).
Important Safety Information
To ensure safe operation, observe the following:
- Do not expose the apparatus to rain or moisture.
- Do not place objects filled with liquids, such as vases, on the apparatus.
- Ensure the mains plug remains readily operable if used as a disconnect device.
- Refer all servicing to qualified service personnel.
- Do not block ventilation openings.
- Use only attachments and accessories specified by the manufacturer.
Manufacturer information
Behringer
Practical help
Common problems
No sound output
Check that the power cable is connected, the power switch is on, and the volume control is turned up. Verify that the input source is active and cables are fully inserted.
Distorted sound
Reduce the volume level on the input device or the MS16 volume control to prevent clipping.
Before use
- Verify the mains voltage matches your region (120V, 230V, or 100V).
- Ensure the speaker cable is securely connected between the left and right speakers.
- Check that all audio input cables are fully inserted into the correct ports.
- Ensure the power switch is in the off position before connecting to mains.
Specs in practice
- Output Power
- Total power output is 16 Watts (2 x 8 Watts).
- Frequency Response
- The range of 80 Hz to 20 kHz covers the standard audible spectrum.
Images and diagrams
- The front panel contains the primary user controls: Mic Level, Bass, Treble, and Volume.
- The rear panel contains the input/output ports: Mic Input, Input 1, Input 2, Speaker connectors, and AC Power.
Model compatibility
- Compatible with dynamic microphones via the 1/4 inch TRS input.
- Requires specific mains voltage based on region (USA/Canada, Europe/UK/Australia, Japan).
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.