Power / Batteries Chargers
Belkin BOOST↑CHARGE™ 10W Wireless Charging Pad (WIA001) FAQ
Frequently asked questions and technical specifications for the Belkin WIA001 10W Wireless Charging Pad, including compatibility, power requirements, and troubleshooting.
Table of contents
Product Overview
The Belkin BOOST↑CHARGE™ 10W Wireless Charging Pad (WIA001) is designed to provide a convenient, cable-free charging solution for mobile devices. Simply place your Qi-compatible device on the pad to begin charging. The unit comes with a 2-year limited warranty and a $2,500 Connected Equipment Warranty (CEW).
Package Contents
The package includes the following items:
- Belkin WIA001 Wireless Charging Pad
- 4-ft USB-A to micro-USB cable
- AC adapter
- Quick start guide
- Regulatory documentation
Power Specifications
The included AC adapter supports a wide input range of 100–240V at 50/60 Hz (0.8A). The output power varies based on the device requirements, supporting up to 18W output configurations (3.6–6V/2A, 6–9V/2A, or 9–12V/1.5A).
Functionality and Fast Charging
The WIA001 supports fast charging for Apple, Samsung, and Google devices. It is designed to charge one phone at a time. The device is not MFi-certified but is RoHS-certified and meets Proposition 65 specifications. The operating temperature range is 0°C to 40°C with 10% to 90% relative humidity.
Compatibility and Usage
The charger is compatible with a wide range of Qi-enabled devices, including various iPhone models (from iPhone 8 to iPhone 13 Pro Max) and Samsung Galaxy Note 10 series. The pad features non-slip rubber strips to keep the device in place. It is compatible with phone cases up to 3 mm thick.
Troubleshooting
If you encounter a charging error, ensure the following:
- The device is properly aligned on the center of the charging pad.
- The device being used is Qi-compatible.
- Neither the charging pad nor the phone is overheating.
Manufacturer information
Belkin
Practical help
Common problems
Charging error or failure to charge
Ensure the device is properly aligned on the pad, verify the device is Qi-compatible, and check that neither the phone nor the pad is overheating.
Before use
- Verify the device is Qi-compatible.
- Ensure the phone case is no thicker than 3 mm.
- Place the device in the center of the pad for optimal alignment.
- Check that the ambient temperature is between 0°C and 40°C.
- Ensure the AC adapter is connected to a 100-240V power source.
Specs in practice
- Input Voltage
- 100–240V, allowing for global use with appropriate regional adapters.
- Case Compatibility
- Works with non-metallic cases up to 3 mm in thickness.
- Operating Temperature
- 0°C to 40°C; avoid using in extreme heat or direct sunlight to prevent charging errors.
Model compatibility
- Supports fast charging for Apple, Samsung, and Google devices.
- Compatible with iPhone 8 through iPhone 13 series and Samsung Galaxy Note 10/10+.
- Not MFi-certified.
- Only charges one device at a time.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.