User Manual for Bestway SaluSpa Miami Inflatable Hot Tub

Quick Guide

This manual provides essential instructions for the safe setup, operation, and maintenance of your Bestway SaluSpa Miami. Always read the full safety warnings before use. Key tasks include testing the GFCI plug before every use, maintaining proper water chemistry, and cleaning the filter cartridge weekly.

Safety Instructions

Warning: To reduce the risk of injury, drowning, or electric shock, follow these precautions:

• Do not permit children to use the spa without close adult supervision.
• Never place electric appliances (light, telephone, radio, or television) within 1.5 meters (5 feet) of the spa.
• Water temperature should never exceed 40°C (104°F). Temperatures between 38°C (100°F) and 40°C (104°F) are considered safe for healthy adults.
• Limit spa use to 10 minutes if water temperature is high.
• Consult a physician before use if you are pregnant, diabetic, have heart disease, or are taking medication.
• Do not use the spa if it is raining or if the ambient temperature is below 4°C (40°F).
• Always attach the spa cover after each use.

Assembly

Before inflating, ensure the area is clear of sharp objects. Do not drag the pool on rough ground. Use the provided wrench to fasten the air valve if it is loose. Ensure the air valve is checked for leaks before inflation. The pressure gauge is for reference only and should not be used as a precision instrument.

Operation

The control panel allows you to manage heating, massage, and filtration. To start heating, press the heat button. The heating duration depends on the starting water temperature and ambient temperature. Always cover the spa when the heating function is activated to reduce heating time. The massage system has an auto-shutoff feature after 30 minutes.

Maintenance

Regular maintenance is required to keep the water clean and the spa in good condition:

• Filter Cartridge: Check and clean daily; replace every week.
• Water Chemistry: Maintain pH between 7.4-7.6, Total Alkalinity 80-120ppm, and Free Chlorine 2-4ppm.
• Cleaning: Use soap and water to clean walls; do not use hard brushes or abrasive cleaners.
• Storage: Ensure the spa and pump are completely dry before storage. Store in a warm, dry place.

Troubleshooting

If you encounter issues, check the following:

• Pump does not operate: Check power source and GFCI.
• Pump does not heat: Check if temperature is set too low, filter is dirty, or heating element failed.
• Massage system not working: Pump may be overheating; unplug and let it cool for 2 hours.
• Leakage: Use the provided repair patch for tears or check if the air valve is loose.