Bright Starts 13062-MEWS Minnie Mouse Forever Besties Activity Jumper User Guide
Quick guide for the Bright Starts 13062-MEWS Minnie Mouse Forever Besties Activity Jumper, covering safety warnings, assembly steps, battery installation, height adjustment, and maintenance.
Table of contents
Quick guide from the manual
This document provides essential instructions for the assembly, safe operation, and maintenance of the Bright Starts 13062-MEWS Minnie Mouse Forever Besties Activity Jumper. Always read the full manual before use.
Safety Warnings
To prevent serious injury or death:
- Use only if the child is at least 6 months old, can sit up unassisted, is less than 30 inches (76.2 cm) tall, and weighs less than 25 lbs (11 kg).
- Never leave the child unattended.
- Do not use near stairs or on elevated surfaces.
- Use only on a flat, level surface.
- Do not allow children who can stand or walk on their own to use the seat.
- Limit use to short periods (20-minute intervals).
- Ensure height adjustments on legs are at the same level before placing the child in the seat.
- Do not add extra strings or straps.
Assembly
Adult assembly is required. The process involves:
- Installing batteries into the Minnie Mouse Spinner Station.
- Attaching the seat ring to the play surface.
- Securing the seat pad to the seat ring.
- Connecting the play surface to the base using the three spring legs.
- Attaching all toys (Minnie Mouse Spinner, Heart Rattle, Heart Mirror, Piano Spinner, etc.) to the play surface.
Battery Information
The product requires (2) AA/LR6 (1.5V) alkaline batteries (not included). Ensure correct polarity as marked in the battery compartment. Replace batteries if functions fail or sound becomes distorted. Do not mix old and new batteries or different types.
Adjusting the Seat Height
The seat height must be adjusted so that the child is not flat-footed. Ensure the child's feet are positioned correctly to avoid injury.
Care and Cleaning
- Seat pad: Machine wash in cold water, gentle cycle, no bleach. Tumble dry on low heat.
- Plastic parts: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
- Frame: Wipe with a soft, clean cloth and mild soap.
Manufacturer information
Bright Starts
Practical help
Common problems
Replace batteries with fresh alkaline batteries. Weak batteries often cause distorted sound or failing lights.
Adjust the seat height immediately. The child should not be flat-footed while in the jumper.
Before use
- Ensure child meets all age, height, and weight requirements.
- Check that all parts are present and not damaged.
- Verify that all height adjustments on the legs are set to the same level.
- Ensure the product is on a flat, level surface.
- Check that all toys are securely attached.
Specs in practice
- Battery type
- (2) AA/LR6 (1.5V) alkaline batteries required.
- Weight limit
- Maximum 25 lbs (11 kg).
- Height limit
- Maximum 30 inches (76.2 cm).
- Age requirement
- Minimum 6 months and must be able to sit up unassisted.
Model compatibility
- For indoor use only.
- Do not use replacement parts from other manufacturers; contact Kids2 for official replacements.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.