User Manual for Bright Starts Rosy Rainbow Infant to Toddler Rocker

Quick guide from the manual

The Bright Starts Rosy Rainbow Infant to Toddler Rocker is designed for infants and toddlers. It features a vibration unit and an adjustable recline function. Important: This product is not a substitute for a crib or bassinet. If the child falls asleep, move them to a firm, flat sleep surface immediately. Never leave the child unattended.

Assembly Instructions

Before assembly, ensure all parts are present. The assembly requires a screwdriver (not included).

• Step 1: Connect the seat frame sides (1 and 2) to the rear cross bar (3). Ensure they click into place.
• Step 2: Attach the kickstand (4) to the frame.
• Step 3: Attach the backrest tube (5) to the frame.
• Step 4: Install the battery into the vibration unit (6).
• Step 5: Secure the vibration unit (6) to the frame using the provided screws (A and B).
• Step 6-8: Attach the seat pad (7) to the frame, securing all buckles and hook-and-loop patches.
• Step 10: Attach the toy bar (8) to the frame.

Using the Rocker

Seat Restraint: Always use the restraint system. Adjust the straps to fit the child snugly. Stop using the restraint system once the child tries to stand up and is able to climb in and out of the rocker.

Recline Function: The reclined position is for children who cannot sit upright unassisted (up to 20 lb / 9 kg). Stop using the reclined position when the baby starts trying to sit up. The upright position is for children who have developed enough upper body control to sit up without tipping forward.

Vibration: Use the on/off button located on the vibration unit to activate or deactivate the vibration feature.

Battery Information

The vibration unit requires (1) size C/LR14 (1.5V) alkaline battery (not included). To install, remove the screw on the battery compartment cover, insert the battery according to the polarity markings, and replace the cover. Replace the battery if the vibration becomes weak or stops working.

Care and Cleaning

• Seat Pad: Remove from the frame. Fasten all buckles and hook-and-loop patches. Machine wash with cold water on a gentle cycle. Do not bleach. Tumble dry on low heat.
• Toy Bar and Toys: Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame: Wipe the metal frame with a soft, clean cloth and mild soap.

Safety Warnings

• Fall Hazard: Never leave the child unattended. Never use on elevated surfaces (e.g., a table). Always use on the floor. Never move or lift the product with the baby inside.
• Suffocation Hazard: Never use on soft surfaces like beds, sofas, or cushions. Never let the child sleep in this product.
• Weight Limit: Never place a child over 40 lb (18 kg) in the product.