Furniture / Dining Room
Assembly Instructions for Coaster 105072 Side Chair and 115091 Dining Table
Quick assembly guide for Coaster 105072 Side Chair and 115091 Dining Table. Includes parts lists, hardware identification, and step-by-step assembly instructions for both furniture items.
Table of contents
Manual images
Click an image to enlargeQuick Guide
This document provides assembly instructions for two separate Coaster Fine Furniture products: the 105072 Side Chair and the 115091 Dining Table. Please ensure you have the correct hardware pack for your specific item before beginning assembly. Do not attempt to repair or modify broken parts; contact the store immediately. These products are intended for home use only.
Assembly Instructions for 105072 Side Chair
Parts Identification:
- A: Seat and Back (1PC)
- B: Base (1PC)
Hardware Identification:
- 1: Bolts M6*25 (4PCS)
- 2: Flat Washer Ø6*16 (4PCS)
- 3: Allen Wrench 4MM (1PC)
Assembly Steps:
- Remove hardware from the box and sort by size.
- Align the base (B) with the seat and back (A).
- Secure the base to the seat using the provided bolts (1) and washers (2) with the Allen wrench (3).
- Ensure all bolts are tightened securely.
Assembly Instructions for 115091 Dining Table
Parts Identification:
- A: Glass (1PC)
- B: Top Frame (1PC)
- C: Leg (4PCS)
Hardware Identification:
- 1: Bolts M10*12 (12PCS)
- 2: Flat Washer Ø10*20 (12PCS)
- 3: Allen Wrench 8MM (1PC)
- 4: Glass Rest (8PCS)
Assembly Steps:
- Place the top frame (B) upside down on a soft surface.
- Attach each leg (C) to the top frame using the bolts (1) and washers (2). Tighten with the Allen wrench (3).
- Once the frame is assembled, flip it over.
- Place the glass rests (4) onto the frame and carefully position the glass (A) on top.
Safety and Maintenance
Check all hardware and parts are present prior to starting assembly. Follow the instructions in the numbered sequence to ensure fast and easy assembly. This product is not intended for commercial establishments.
Manufacturer information
Coaster Fine Furniture
Practical help
Common problems
Wobbly furniture after assembly
Ensure all bolts are tightened evenly. If the floor is uneven, use furniture levelers if applicable or adjust the placement.
Missing hardware
Check all boxes (B1, B2, B3) thoroughly. Hardware packs are often taped to the underside of furniture components or inside specific boxes.
Before use
- Sort all hardware by size before starting.
- Verify all parts are present against the parts list.
- Use a soft surface (like a rug or the shipping box) to assemble to prevent scratching the finish.
- Do not fully tighten bolts until all are in place to allow for alignment adjustments.
Specs in practice
- Dimension Tolerance ±5%
- Standard manufacturing variance for furniture dimensions.
Images and diagrams
- Step 1 (Chair): Shows the alignment of the base frame with the seat/back cushion.
- Step 1 (Table): Shows the attachment of the four legs to the top frame corners.
- Step 3 (Table): Illustrates the placement of glass rests before laying the glass top.
Model compatibility
- 105072 hardware pack is located in 105072B2.
- 115091 hardware pack is located in 115091(B3).
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.