Crystorama 1486-HB-CL-MWP Majestic 11-Light Chandelier

Product Overview

The Crystorama Majestic 11-Light Chandelier (Model #1486-HB-CL-MWP) is a sophisticated lighting fixture designed for indoor use in dry locations. This elegant piece features a historic brass finish and requires professional installation to ensure safety and compliance with electrical codes.

Technical Specifications

• Bulb Requirements: 13 Candelabra base bulbs, 40 Watts recommended, 60 Watts maximum. LED bulbs are strongly recommended for extended use.
• Dimensions: Approximately 33 inches in diameter and 38 inches in height.
• Rating: Dry rated for indoor use only.

Safety Information

Warning: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and local regulations. Ensure the power is turned off at the circuit breaker before beginning installation. This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Installation and Assembly

Before starting, perform a complete inventory of all parts and components. Securely attach the fixture to the outlet box, then install the bobeches and bulbs before connecting the power. The fixture requires careful dressing with crystal sets. It is crucial to apply these sets in alphabetical order, starting with the pocket labeled (A). Refer to the provided crystal set list for specific sizes and quantities for each section (A through E).

Maintenance and Care

Regularly check all connections and ensure the fixture remains securely mounted. When cleaning, use a soft, dry cloth to avoid damaging the historic brass finish. Do not use harsh chemicals or abrasive cleaners on the crystals or metal components.

Troubleshooting

If the fixture fails to illuminate, verify that the power is on at the breaker and that all bulbs are properly seated in their sockets. Ensure all wire connections are secure and follow the wiring diagram provided in the component list. If issues persist, consult a licensed electrician.