Crystorama 1488-HB-CL-MWP Chandelier Assembly Instructions

Product Overview

The Crystorama 1488-HB-CL-MWP is a decorative chandelier designed for indoor use in dry locations. This elegant fixture features a multi-tier crystal basket design and requires professional installation to ensure safety and compliance with electrical codes.

Safety Information

Warning: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and local regulations. Always turn off the power at the circuit breaker before beginning installation. This product contains lead, which is known to the State of California to cause cancer and reproductive harm.

Installation and Setup

Before starting, perform a complete inventory of all parts and components listed in the manual. Securely attach the fixture to the outlet box, install the bobeches and bulbs, and then connect the power. The fixture requires 20 candelabra base bulbs (40W max each; LED bulbs are recommended for extended use).

Dressing the Fixture

The chandelier requires precise crystal placement to achieve its intended look. It is important to apply crystal sets in alphabetical order, starting with the pocket labeled (A). The crystal sets are categorized as follows:

• Set A: 368 sets (14mm + 1.5 inch AS2)
• Set B: 24 sets (14mm + 3 inch AS20)
• Set C: 40 sets (38 x 14mm)
• Set D: 80 sets (various sizes including 28mm, 26mm, 24mm, 20mm, 18mm, and 16mm)
• Set E: 1 piece (6 x 14mm + 40mm AS8 ball)

Refer to the detailed illustrations for specific pin hole locations on the banding and basket tiers to ensure correct placement of each crystal set.

Maintenance and Care

To maintain the appearance of the chandelier, clean the crystals and metal frame periodically with a soft, dry cloth. Ensure the power is off during cleaning. Avoid using harsh chemicals that may damage the finish or the crystal surfaces.