Crystorama 1487-HB-CL-MWP Eight Light Chandelier

Product Overview

The Crystorama 1487-HB-CL-MWP is an eight-light chandelier designed for indoor use in dry locations. This fixture combines a decorative metal frame with extensive crystal ornamentation to provide a classic aesthetic. The unit requires eight candelabra base bulbs, with a recommended 40 watts each and a maximum of 60 watts per socket. LED bulbs are recommended for extended use and energy efficiency.

Safety Information

Warning: All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and all applicable local electrical codes. Always turn off the power at the circuit breaker before beginning installation. This product contains lead, a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

Installation and Setup

Before starting, perform a complete inventory of all parts and components provided in the package. The installation process involves securely attaching the fixture to an outlet box, installing the bobeches and bulbs, and then connecting the power. Once the electrical installation is complete, proceed to dress the fixture with the provided crystal sets. It is critical to apply the crystal sets in alphabetical order, starting with the pocket labeled (A).

Crystal Configuration

The chandelier requires precise placement of crystal sets to achieve the intended design:

• Set A: 224 sets consisting of 14mm crystals and 1.5-inch AS2 pieces.
• Set B: 5 sets consisting of 14mm crystals and 3-inch AS20 pieces.
• Set C: 25 sets consisting of 27 14mm crystals.
• Set D: 50 sets consisting of a mix of 28mm, 26mm, 24mm, 20mm, 18mm, and 16mm crystals.
• Set E: 1 piece consisting of 5 14mm crystals and a 40mm AS8 ball.

Maintenance and Troubleshooting

To maintain the appearance of the chandelier, periodically dust the crystals and metal frame with a soft, dry cloth. Ensure that all connections remain secure during routine cleaning. If the fixture fails to light, verify that the bulbs are properly seated in the sockets and that the power supply is active. If issues persist, consult a licensed electrician to inspect the wiring and socket connections.