findmanualpdf.com

Installation Instructions for Danfoss 013R9063 Pipe Fittings

Quick installation guide for Danfoss 013R9063 fittings for steel and copper pipes. Learn the correct assembly sequence, pipe preparation, and tightening procedure to ensure a secure connection.

Table of contents

Manual images

Click an image to enlarge
Pipe preparation: Cut at 90 degrees and file smooth. Page 1 Assembly order: Nut, ring, and fitting body. Page 1 Tightening procedure: Hand tighten followed by 1/2 to 1 turn with a wrench. Page 1

Quick guide from the manual

This document provides the installation procedure for Danfoss 013R9063 fittings designed for steel and copper pipes. It covers essential pipe preparation, the correct assembly sequence, and the required tightening method to ensure a secure, leak-free connection.

Preparation

Proper preparation of the pipe is critical for a successful installation:

Pipe preparation: Cut at 90 degrees and file smooth.
Pipe preparation: Cut at 90 degrees and file smooth.
  • Ensure the pipe is cut cleanly at a 90-degree angle.
  • Use a file to smooth the end of the pipe if necessary.
  • Do not leave the pipe end jagged or deformed, as this will prevent a proper seal.

Installation Steps

Follow these steps to assemble the fitting correctly:

Assembly order: Nut, ring, and fitting body.
Assembly order: Nut, ring, and fitting body.
Tightening procedure: Hand tighten followed by 1/2 to 1 turn with a wrench.
Tightening procedure: Hand tighten followed by 1/2 to 1 turn with a wrench.
  1. Slide the nut onto the pipe.
  2. Slide the ring (olive) onto the pipe.
  3. Insert the pipe into the fitting body.
  4. Tighten the nut by hand initially to ensure it is threaded correctly.
  5. Use a wrench to tighten the nut an additional 1/2 to 1 turn to secure the connection.

Important Warnings

  • Do not use a pipe wrench (monkey wrench) for the final tightening, as this may damage the fitting.
  • Ensure the pipe material and dimensions meet DIN 1057/2391 standards.

Manufacturer information

Danfoss A/S

Brand profile
Manufacturer website https://www.danfoss.com Support https://www.danfoss.com/en/service-and-support/ Manufacturer manuals https://www.danfoss.com/en/service-and-support/downloads/

Practical help

Common problems

Leaking connection

Ensure the pipe was cut at a perfect 90-degree angle and the end is smooth and free of burrs before assembly.

Damaged fitting

Do not use a pipe wrench for tightening; use a standard wrench to avoid deforming the nut.

Before use

  • Ensure pipe is cut at 90 degrees.
  • File the pipe end to remove burrs.
  • Verify pipe material is steel or copper.
  • Check that the pipe meets DIN 1057/2391 standards.

Images and diagrams

  • The diagram shows the correct order of components: Nut, Ring, Fitting Body.
  • The diagram illustrates the 90-degree cutting requirement.

Model compatibility

  • Designed for steel and copper pipes.
  • Compliant with DIN 1057/2391.

Related manuals

Related manuals from the same brand or category.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.