User Guide for DJI Mavic 3 Battery Charging Hub and 65W Car Charger

Quick guide from the manual

This document covers two accessories for the DJI Mavic 3: the 100W Battery Charging Hub and the 65W Car Charger. Both devices are designed to charge Intelligent Flight Batteries. The Charging Hub is intended for use with a power adapter to charge up to three batteries in sequence, while the Car Charger allows for charging via a vehicle power outlet.

DJI Mavic 3 Battery Charging Hub (100W)

Usage

The charging hub is designed to charge up to three Intelligent Flight Batteries in sequence, starting from the battery with the highest power level to the lowest. To use:

• Insert the Intelligent Flight Battery into the battery port.
• Connect the charging hub to a power outlet (100-240 V, 50-60 Hz) using a compatible charger.
• The hub will automatically charge the batteries in sequence.
• You may disconnect the battery once charging is complete.

Status LED Indicator Descriptions

• Solid yellow: No battery inserted.
• Pulses green: Charging.
• Solid green: All batteries fully charged.
• Blinks yellow: Battery temperature too low or too high (no action required).
• Solid red: Power supply or battery error. Remove and reinsert the batteries or unplug and plug in the power adapter.

Safety and Maintenance

• Only compatible with BWX260-5000-15.4 Intelligent Flight Batteries.
• Place the hub on a flat and stable surface.
• Do not touch the metal terminals. Clean them with a clean, dry cloth if buildup is noticeable.

DJI 65W Car Charger

Usage

The car charger is used to charge the Mavic 3 Intelligent Flight Battery, remote controller, or mobile devices using a car power outlet.

• Important: Only use the car charger when the engine is running to avoid draining the vehicle battery.
• If the charger becomes loose and is reconnected during charging, you may need to remove and reinsert the battery to resume.
• Do not touch the metal terminal after the charger is unplugged.

Specifications

Battery Charging Hub (CHX265-100)

• Compatible Power Adapter: DJI USB-C Power Adapter (100W) or DJI 65W Portable Charger.
• Input: 5-20 V, 5 A.
• Operating Temperature: 5° to 40° C (41° to 104° F).

Car Charger (CCX260-65)

• Input Voltage: 12.7-16 V, 6.5 A.
• DC Output: USB-C (5V/5A, 9V/5A, 12V/5A, 15V/4.3A, 20V/3.25A, 5-20V/3.25A) and USB-A (5V/2A).
• Operating Temperature: 5° to 40° C (41° to 104° F).