East Oak 1500W Premium Electric 2-in-1 Wall Mount Patio Heater

Product Overview

The East Oak 1500W Premium Electric 2-in-1 Wall Mount Patio Heater is designed to provide efficient outdoor heating with ultra-low glare technology. This versatile unit can be wall-mounted or used with the included stand, making it suitable for open bars, courtyards, and patios. It features adjustable heating levels controlled via remote and an integrated overheat protection system for added safety.

Technical Specifications

• Model: SPH22001
• Voltage: 120V 60Hz
• Power Consumption: 1500W
• IP Rating: IP65

Safety Information

Danger: Do not cover the heater while in use to prevent overheating. This appliance is intended for adult use only. Children under 8 years old should be supervised, and children under 3 years old should stay away from the unit during operation.

Caution: The heater becomes extremely hot during use and can cause severe burns. Maintain a clearance of at least 3 feet from all sides. Do not use in small rooms with children or pets, and keep away from combustible materials like curtains, gas, or flammable liquids. Do not place the heater directly below a wall socket.

Installation and Setup

Proper installation is critical for safe operation. The bottom edge of the heater must be at least 1.8 meters above the floor. Ensure a minimum distance of 0.25 meters from ceilings or roofs and 0.5 meters from side walls. The unit should be mounted by an authorized specialist. When using the stand, the recommended mounting angle is 45 degrees. Always connect to a properly grounded outlet and avoid using extension cords or power strips.

Operation and Remote Control

The heater is operated via a remote control with a range of 3-5 meters. Ensure the remote is aligned with the receiver for optimal performance. The remote allows for adjusting heating levels (L1, L2, L3) and setting a timer (1-24 hours). The heater includes an overheat protection system that automatically shuts off the unit if temperatures become too high; if this occurs, turn off the unit, unplug it, and allow it to cool for 5-10 minutes before resuming.

Care and Maintenance

The heater features a durable aluminum exterior requiring minimal maintenance. Before cleaning, always unplug the device and allow it to cool completely. Use a clean, lint-free cloth or a soft bristle brush for cleaning. Do not use abrasive cleaners or immerse the unit in water. If the cord or plug is damaged, contact customer support for professional repair or replacement.