East Oak 1500W Premium Electric 2-in-1 Wall Mount Patio Heater

Product Overview

The East Oak 1500W Premium Electric 2-in-1 Patio Heater is designed to provide efficient, comfortable outdoor heating. Utilizing advanced infrared technology with ultra-low glare, it delivers instant warmth with 90% less light than traditional heaters. This versatile unit can be wall-mounted or used with the included stand, making it suitable for open bars, courtyards, plazas, and stations.

Technical Specifications

• Model: SPH22001
• Voltage: 120V 60Hz
• Power Consumption: 1500W
• IP Rating: IP65

Safety Guidelines

Danger: This appliance is for adult use only. Children under 8 years old should only use it under strict supervision. Keep children and pets at least 3 feet away from the heater during operation as it becomes extremely hot and can cause severe burns or injury.

• Do not cover the heater while in use to avoid overheating.
• Do not use in small rooms with children or pets.
• Keep at least 3 feet away from combustible materials like curtains, cloth, or flammable liquids.
• Do not place the heater directly below a socket outlet.
• Always unplug the device after use and allow it to cool completely before handling or cleaning.
• Do not use if the cord or plug is damaged.
• Connect only to a properly grounded outlet. Do not use extension cords or power strips.

Installation and Operation

Proper installation is critical for safety. The heater must be mounted at least 1.8 meters above the floor, with at least 0.25 meters of clearance from ceilings or roofs, and 0.5 meters of clearance from walls on each side. The recommended mounting angle is 45 degrees. Ensure all mounting hardware is stable and secure. The unit features an overheat protection system that automatically shuts off the heater if it gets too hot; if this happens, turn it off, unplug it, and allow it to cool for 5-10 minutes before resuming operation.

Remote Control and Settings

The heater is operated via remote control (requires 2 AAA batteries, sold separately) with a range of 3-5 meters. The remote allows you to adjust heating levels, set a timer (1-24 hours), and power the unit on or off. Ensure there is no physical blockage between the remote and the heater's infrared receiver for optimal performance.

Care and Maintenance

The heater features a durable aluminum exterior requiring minimal maintenance. Before cleaning, ensure the unit is unplugged and completely cool. Clean only with a lint-free cloth or soft bristle brush. Do not use abrasive cleaners, rough brushes, or chemical products. Never immerse the cord, plug, or heater in water or any other liquid. If repairs are needed, contact the manufacturer or a qualified electrician.