FLEX RS 25 18.0-EC Single-Hand Reciprocating Saw
The FLEX RS 25 18.0-EC is a professional-grade, cordless one-handed reciprocating saw designed for industrial and trade applications. It features a brushless motor, variable speed control, and tool-less blade changing for efficient cutting...
Table of contents
Product Description
The FLEX RS 25 18.0-EC is a high-performance cordless one-handed reciprocating saw, engineered for demanding industrial and trade tasks. It is designed for cutting wood products, plastics, and various metal materials with precision and ease.

Technical Data
- Voltage: 18 Vdc
- No-load speed: 0-3000 r.p.m
- Stroke length: 25.4 mm
- Weight (without battery): 1.9 kg
- Sawing capacity (wood): 210 mm
- Sawing capacity (aluminum): 30 mm
- Sawing capacity (metal pipe): 110 mm
Safety Instructions
WARNING: Read all safety warnings and instructions provided with the tool. Failure to follow these instructions may result in electric shock, fire, or serious injury. Always hold the tool by insulated gripping surfaces when performing operations where the cutting accessory may contact hidden wiring. Use clamps or other practical methods to secure the workpiece to a stable platform.
Operation
Before use, ensure the battery is fully charged. To install a blade, rotate the tool-less blade clamp sleeve, insert the blade until it locks, and verify it is secure. The tool features a lock-off button to prevent accidental activation and a variable-speed trigger for precise control. For plunge cutting, rest the edge of the pivoting shoe on the workpiece and slowly lower the blade into the material while the tool is running.

Maintenance and Care
Always remove the battery before performing any work on the tool. Regularly clean the tool and the grille in front of the vent slots to prevent dust buildup. Periodically blow out the housing interior and motor with dry compressed air to ensure optimal performance.
Troubleshooting
If the LED lights flash rapidly, the tool or battery is overloaded or too hot; allow them to cool. If the LED lights flash slowly, the battery capacity is low and requires charging. If the tool fails to start or shuts down unexpectedly, contact customer service.
Disposal
Do not dispose of power tools or batteries in household waste. In accordance with EU directives, these items must be collected separately and recycled in an environmentally friendly manner.
Related manuals
Related manuals from the same brand or category.
FLEX SBE 64 18-EC / SBE 127 18-EC Cordless Band Saw
FLEXFLEX CSM 57 18-EC Battery Metal Circular Saw
FLEXFLEX CS 68 18-EC Cordless Circular Saw
FLEXFLEX SBE 64 18-EC Brushless Cordless Band Saw
FLEXFLEX TS 92 18-EC Extremely Lightweight Cordless Table Saw
FLEXFLEX IW 1/2" 750 18.0-EC/5.0 Cordless Impact Wrench Set
FLEXFLEX LB 125 18.0-EC/5.0 Set Cordless Angle Grinder
FLEXFLEX IW 3/4" 18.0-EC Parts Diagram
FLEXFLEX SE 125 18.0-EC Parts Diagram
FLEXManual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.