Lighting / Holiday Lighting
Safety and Care Instructions for GE LED 400 Lights 23138LO / 23146LO
Essential safety, installation, and care guide for GE LED 400 Lights (models 23138LO and 23146LO). Learn how to safely set up, maintain, and store your holiday lighting.
Quick answers from the manual
Quick answer
- These lights are for indoor use only. Always inspect the product for damage before use, keep away from heat sources, and unplug when unattended. p. 1
Key actions
- Inspect product before use p. 1
- Store in a cool, dry place p. 1
Where to find it in the PDF
- Safety and Care Instructions p. 1, 2
Table of contents
Important Safety Information
These LED lights are designed for indoor use only. To ensure safety, please follow these precautions:
- Do not use the product near gas or electric heaters, fireplaces, candles, or other heat sources.
- Do not secure the wiring with staples or nails, and do not place the product on sharp hooks or nails.
- Do not let lamps rest on the supply cord or any wire.
- Unplug the product when leaving the house, retiring for the night, or if left unattended.
- This is an electric product, not a toy. Keep out of reach of small children.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not close doors or windows on the product or extension cords, as this may damage the wire insulation.
- Do not cover the product with cloth, paper, or any material not part of the product when in use.
Use and Care Instructions
Proper maintenance ensures the longevity and safety of your lighting set:
- Live Tree Setup: If placing the product on a live tree, ensure the tree is fresh and well-maintained. Do not use on trees where needles are brown or break off easily. Keep the tree holder filled with water and ensure the tree is stable.
- Inspection: Before using or reusing, inspect the product carefully. Discard any product that has cut, damaged, or frayed wire insulation, loose connections, exposed copper wire, or cracks in the lampholders.
- Storage: When not in use, remove the product carefully from trees or bushes to avoid strain on conductors and wires. Store neatly in a cool, dry location protected from sunlight.
Regulatory and Contact Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that the device does not cause harmful interference and must accept any interference received. If you experience radio or television interference, try reorienting the antenna, increasing the separation between equipment, or connecting to a different circuit.
For questions or assistance, contact customer service at 1-877-398-7337 or visit www.geholidaylighting.com.
Official resources from the manual
Practical help
Common problems
Damaged wires or insulation
Discard the product immediately; do not attempt to repair.
Radio or TV interference
Reorient or relocate the receiving antenna, increase separation between the equipment and receiver, or connect to a different circuit.
Before use
- Inspect for cut, damaged, or frayed wire insulation
- Check for loose connections
- Ensure no exposed copper wire
- Check for cracks in lampholders or enclosures
- Ensure the tree is fresh and stable (if used on a live tree)
Show more Show less
Model compatibility
- Indoor use only
- Not intended for permanent installation
Manual page author
Emily Carter
User documentation editor