Lighting / Holiday Lighting
Instruction Manual for GE Appliances 23114LO LED 456 C7 Light Tree
Quick guide for the GE Appliances 23114LO LED 456 C7 Light Tree. Includes safety instructions, lamp replacement procedures, and troubleshooting steps for common lighting issues.
Quick answers from the manual
Quick answer
- The 23114LO LED 456 C7 Light Tree is for indoor use. It uses 3.3V, 0.066W LED lamps. If the lights fail, check for loose bulbs, ensure connectors are fully inserted, and verify the foot pedal is on. p. 1
Key actions
- Replace a lamp p. 1
Problems and fixes
Product does not light
Unplug the set. Gently push each LED base firmly into the socket. Check for out of place lead wires. Ensure connectors are fully inserted.
p. 1Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Lamp Voltage | 3.3V | Required voltage for replacement lamps | p. 1 |
| Lamp Wattage | 0.066W | Required wattage for replacement lamps | p. 1 |
Where to find it in the PDF
- Safety and Troubleshooting p. 1
Table of contents
Quick Guide
This manual provides instructions for the GE Appliances 23114LO LED 456 C7 Light Tree. The product is designed for indoor use only. Always inspect the product for damage before use and ensure it is unplugged when unattended.
Safety Instructions
- For indoor use only.
- Do not use on live trees with brown needles or those that break easily.
- Keep the tree holder filled with water.
- Do not secure wiring with staples or nails.
- Unplug the product when leaving the house or retiring for the night.
- Do not twist lamps; this product uses push-in type lamps.
User Servicing: Replacing Lamps
If a lamp needs replacement, use only the provided 3.3V, 0.066W LED lamps.
- Unplug the product from the outlet.
- Twist the LED cover while pulling to remove it.
- Pull the lamp and plastic base straight out of the lampholder.
- Insert the new lamp. If the base does not fit, straighten the leads of the new lamp, thread them through the holes in the old base, and bend the leads up to touch the contacts inside the lampholder.
- Align the cover, push down, and twist to secure.
Troubleshooting
If the product does not light, check the following:
- Loose LEDs: Gently push (do not twist) each LED base firmly into the socket.
- Connectors: Ensure male/female connectors are fully inserted.
- Foot Pedal: Ensure the foot pedal is in the "on" position.
- Missing LEDs: Replace with a spare LED.
Practical help
Common problems
Product does not light
Check for loose LEDs, ensure connectors are fully inserted, and verify the foot pedal is in the on position.
Missing LED
Mark the socket with tape, unplug the set, and replace the LED with a spare.
LED fails to light
Replace the LED if it is shorted or open.
Lights fail to switch colors
Contact Customer Support as the control box or foot pedal may be defective.
Before use
- Inspect for cut, damaged, or frayed wire insulation.
- Check for cracks in lampholders or enclosures.
- Ensure the tree is stable and well-maintained.
- Verify all LEDs are firmly seated in their sockets.
- Ensure the product is unplugged when not in use.
Show more Show less
Specs in practice
- Lamp Voltage
- 3.3 Volts
- Lamp Wattage
- 0.066 Watts
Images and diagrams
- Figure 1 & 2: Illustrates the lamp replacement process, showing how to remove the cover and align the leads into the base.
Model compatibility
- For indoor use only.
- Replace lamps only with the 3.3V, 0.066W spare lamps provided with this product.
Manual page author
Michael Turner
Technical manual editor