Lighting / Holiday Lighting
User Guide for GE Appliances 23008LO LED Christmas Lights
Quick guide for GE Appliances 23008LO LED Christmas lights. Includes safety instructions, lamp replacement steps, and troubleshooting for common lighting issues.
Quick answers from the manual
Quick answer
- The GE Appliances 23008LO is a set of 150 LED Christmas lights for indoor use. Maintenance involves replacing burnt-out lamps with the provided 3.3V, 0.066W spare LEDs. p. 1
Key actions
- Replace a lamp p. 1
- Troubleshoot non-lighting product p. 1
Problems and fixes
Product does not light
Check for loose LEDs, ensure connectors are fully inserted, and check foot pedal position.
p. 1Show 2 more answers Show less
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Lamp Voltage | 3.3V | Required voltage for replacement lamps | p. 1 |
| Lamp Wattage | 0.066W | Required wattage for replacement lamps | p. 1 |
Where to find it in the PDF
- Safety and Troubleshooting p. 1
Table of contents
Quick Guide
This document provides essential safety, maintenance, and troubleshooting information for the GE Appliances 23008LO LED Christmas lights. These lights are designed for indoor use only and are not intended for permanent installation.
Safety Instructions
- Do not use near gas or electric heaters, fireplaces, candles, or other heat sources.
- Do not secure wiring with staples or nails, or place on sharp hooks.
- Unplug the product when leaving the house, retiring for the night, or if left unattended.
- This is an electric product, not a toy. Keep out of reach of small children.
- Do not hang ornaments or other objects from the cord, wire, or light string.
- Do not cover the product with cloth, paper, or any material when in use.
- Do not twist lamps; this product uses push-in type lamps.
Use and Care
- If placing on a live tree, ensure the tree is well-maintained, fresh, and stable. Keep the tree holder filled with water.
- Before use or reuse, inspect the product carefully. Discard any product with cut, damaged, or frayed wire insulation, cracks in lampholders, or loose connections.
- When storing, remove carefully from branches to avoid strain on conductors. Store in a cool, dry location protected from sunlight.
User Servicing Instructions
Replacing the lamp:
- Unplug the product from the outlet. Do not pull by the cord.
- Pull the lamp and plastic base straight out of the lampholder.
- Replace the lamp with a 3.3 Volt, 0.066 Watt LED type lamp (provided with the product).
If the new lamp base does not fit:
- Remove the base of the burned-out lamp by straightening the lamp leads and gently pulling the lamp out.
- Thread the leads of the new lamp through the holes in the old base (one lead in each hole).
- After insertion, bend each lead up so they touch the contacts inside the lampholder.
Troubleshooting
If the product does not light, check the following:
- Ensure LEDs are pushed firmly into the socket (do not twist).
- Check for loose connections or male/female connectors not fully inserted.
- Ensure the foot pedal is in the 'on' position.
- If an LED is missing, replace it with a spare LED included with the product.
Contact Information
For questions or assistance, call customer service at 1-877-398-7337 or visit www.geholidaylighting.com.
Official resources from the manual
Practical help
Common problems
Product does not light
Check if LEDs are loose, connectors are fully inserted, or the foot pedal is in the off position.
LED is missing
Mark the socket with tape, unplug the set, and replace the missing LED with a spare.
LED fails to light (shorts or opens)
Replace the bad LED as soon as identified.
Lights fail to switch from white to multi
Contact Customer Support as this may indicate a defective control box or foot pedal.
Before use
- Inspect for damaged wire insulation or cords.
- Check for cracks in lampholders or enclosures.
- Ensure no loose connections or exposed copper wire.
- If using on a live tree, ensure the tree is fresh and stable.
- Keep the tree holder filled with water.
Show more Show less
Specs in practice
- Lamp Voltage
- 3.3 Volt
- Lamp Wattage
- 0.066 Watt
Model compatibility
- Indoor use only.
- Not intended for permanent installation.
- Do not use with lamp shunts.
Manual page author
Michael Turner
Technical manual editor