User Guide for HALO Gel Polish Plus 12ml

Quick guide from the manual

This document provides essential instructions for the professional application and safe removal of HALO Gel Polish Plus. Proper preparation and curing are critical for a long-lasting finish. For technical support, contact [email protected].

Application

1. Prep the nails by shaping, performing cuticle work, and removing surface shine with a Halo Elite Buffer.
2. Clean the nail plate using Halo Prep & Scrub to remove dust and oils.
3. Apply a thin layer of HGP+ Base Coat, ensuring the free edge is sealed.
4. Cure for 60 seconds in a Halo Lamp.
5. Scrape excess gel from the bottle neck before applying color. Use thin coats.
6. Apply a thin layer of HGP+ color, seal the free edge, and cure for 60 seconds.
7. Repeat steps 5 and 6 for the second coat.
8. Apply HGP+ Top Coat, seal the free edge, and cure for 60 seconds.
9. If using a wipe-off top coat, wait 5 seconds for nails to cool, then remove the sticky layer with a Halo Elite Nail Wipe.
10. Allow nails to cool for 2 minutes before applying Halo Citrus Crush Cuticle Oil.

Removal

1. Heat Halo Heat Mitts in the microwave for 120 seconds. File and buff the nail with a Halo Precision File.
2. Apply Acetone to Halo Foil Wraps and wrap each nail tightly.
3. Place hands into Heat Mitt Liners and cover with the heated Halo Heat Mitts.
4. Leave for 7 minutes, then remove one hand at a time to check progress with a Halo Gel Scraper. Repeat if necessary.
5. Once all product is removed, gently file and buff the nail, then finish with cuticle oil or prep for a new application.