Hilti AG 150-20D 01 Angle Grinder

Product Description

The Hilti AG 150-20D is a high-performance, hand-held electric angle grinder engineered for professional use. It is versatile, capable of cutting and grinding metal and mineral materials, as well as brushing, sanding, and hole cutting in tiles, all without the use of water. The tool features advanced safety and performance technologies, including 3D Active Torque Control (3DATC) to prevent kickback, a starting current limiter for smooth operation, and constant-speed electronics for maximum efficiency.

Safety Information

Warning: Read and understand all safety warnings and instructions before use. Failure to follow these instructions can result in electric shock, fire, or serious injury. Always wear eye protection and use the provided auxiliary handle for maximum control. Ensure the work area is clean, well-lit, and free of flammable materials. Never operate the tool without the appropriate guard.

Operation

Before starting, ensure the tool is in the correct working position. The on/off switch includes a built-in switch-on interlock to prevent unintentional starting. For grinding, maintain a 5° to 30° angle of attack with moderate pressure. When cutting, maintain a moderate feed rate and keep the tool at approximately 90° to the cutting plane. Always wait for the tool to come to a complete stop before laying it down.

Maintenance and Care

Regularly clean the air vents and the dust filter to prevent electrical malfunctions. Use only genuine Hilti spare parts and consumables. If the tool or its power cord shows signs of damage, stop use immediately and contact Hilti Service. Always unplug the tool before performing any maintenance or changing accessories.

Troubleshooting

• Product does not start: Check the power supply or have the cord/plug inspected by a qualified specialist.
• Product does not develop full power: Ensure the extension cord has an adequate conductor cross-section.
• Overheating: Clean the air vents and allow the tool to cool down.

Disposal

Most materials used in Hilti tools are recyclable. Please separate materials correctly before recycling. Do not dispose of power tools or electronic equipment as household waste.