Computers / Printers
Quick Start Guide for Honeywell Xenon XP 1950h Healthcare 2D Barcode Scanner
A concise guide for the Honeywell Xenon XP 1950h healthcare barcode scanner, covering connection methods, scanning techniques, configuration barcodes, and troubleshooting.
Table of contents
Quick guide from the manual
This document provides essential setup and configuration instructions for the Honeywell Xenon XP 1950h healthcare 2D barcode scanner. It covers physical connection, basic operation, and common configuration settings via scanning barcodes.
Preparation
Before connecting the scanner, ensure the host computer is powered off. Connect the scanner to the computer, then power on the computer.
Connecting the scanner
The scanner supports multiple interface types. Ensure the correct cable is used for your host system:
- USB: Connect the USB cable directly to the scanner and the host computer's USB port.
- Keyboard Wedge: Connect the cable to the scanner and the host computer's keyboard port, ensuring the keyboard is also connected to the scanner cable assembly.
- RS232 Serial: Connect the RS232 cable to the scanner and the host computer's serial port.
Scanning technique
To scan a barcode, aim the red illumination beam at the center of the barcode. The orientation of the beam does not matter as long as the scanner can successfully read the code.
Configuration settings
The scanner can be configured by scanning specific barcodes provided in this guide:
- Standard Defaults: Scan the "Standard Product Defaults" barcode to reset the scanner to factory settings.
- Interface Modes: Choose between USB Serial (requires driver for Windows), USB PC Keyboard, or specific healthcare application modes like Epic or Meditech.
- Quiet Operation: Options are available to set the scanner to silent mode or low-volume modes for patient-friendly environments.
- Trigger Modes: Select between "Manual Trigger - Normal" (default) or "Presentation" modes.
Support and resources
For advanced configuration, use the EZConfig-Scanning software tool available on the Honeywell website. For technical support, visit www.hsmcontactsupport.com. Product documentation can be found at www.honeywellaidc.com.
Official resources from the manual
Manufacturer information
Honeywell International Inc.
Practical help
Common problems
Scanner not recognized as a serial device on Windows
Download and install the driver from www.honeywellaidc.com to enable USB Serial emulation.
Scanner is too loud for a healthcare environment
Scan the 'Quiet Operation' or 'Silent Mode' barcodes to reduce or eliminate audible beeps.
Before use
- Power off the host computer before connecting the scanner.
- Ensure the correct interface cable (USB, Keyboard Wedge, or RS232) is used.
- If using an external power supply, ensure it is properly connected.
- Verify the keyboard layout matches your region by scanning the appropriate country code barcode.
Specs in practice
- Streaming Presentation
- The scanner illumination remains on continuously to detect barcodes automatically.
Model compatibility
- Apple Macintosh computers automatically recognize the scanner as a USB CDC device without extra drivers.
- Specific configuration barcodes are provided for Epic and Meditech software applications.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.