HOTO 16V Brushless Drill Tool Kit

Product Overview

The HOTO 16V Brushless Drill Tool Kit is a versatile household set designed for various tasks. The kit includes a 16V brushless drill, a claw hammer with a rubber cap, a multifunctional screwdriver with 10 bits, needle-nose pliers, an adjustable wrench, and a self-locking tape measure. Each tool is designed for specific applications, such as tightening screws, clamping workpieces, or measuring distances up to 3 meters.

How to Use

To operate the drill, insert the appropriate bit into the chuck by turning it until secure. The trigger is pressure-sensitive, allowing for variable speeds. Use the direction and lock switch to toggle between forward and reverse rotation. The tool features two modes: manual torque/speed mode with 32 levels and an automatic mode that stops when resistance is detected. The display screen shows the current mode and torque settings.

General Power Tool Safety Warnings

Always keep the work area clean and well-lit. Wear appropriate personal protective equipment, including safety goggles and non-slip shoes. Do not operate power tools in explosive atmospheres. Ensure the tool is switched off before connecting to a power source. Keep hair and loose clothing away from moving parts. When using long drill bits, operate at lower speeds and maintain direct contact with the workpiece to prevent bending.

Maintenance and Troubleshooting

Keep handles dry, clean, and free from oil or grease. Recharge the battery only with the specified charger. If the drill stops rotating and displays an error code, check the battery temperature or charge level. If the drill bit cannot be installed, ensure it is compatible with the chuck dimensions (maximum 10mm). If the tool does not operate, verify that the direction switch is not in the middle locked position.

Specifications

The HOTO 16V Brushless Drill features a 1900 mAh lithium-ion battery. It offers a high gear speed of 0-1700/min and a low gear speed of 0-400/min, with a maximum torque of 442 lb-in. The operating temperature range is -10°C to 45°C. The device should be disposed of at designated recycling collection points for waste electrical and electronic equipment.