Furniture / Storage Cabinets
IKEA VIHALS Chest of 6 Drawers Assembly Guide
A comprehensive assembly and safety guide for the IKEA VIHALS chest of 6 drawers. This manual includes step-by-step installation instructions, wall anchoring requirements to prevent tip-over, and care instructions.
Table of contents
Manual images
Click an image to enlargeImportant Safety Information
WARNING: Serious or fatal crushing injuries can occur from furniture tip-over. To prevent this, you must ALWAYS secure this furniture to the wall using the included tip-over restraints.
To further reduce the risk of serious injury and death:
- Place the heaviest items in the lower drawer.
- Do not set TVs or other heavy objects on top of this product.
- Never let children climb or hang on drawers, doors, or shelves.
Tools Required
To assemble this furniture, you will need the following tools:
- Screwdriver
- Hammer
- Pencil
- Power drill
- Drill bits (8 mm for wall plugs, 3 mm for solid wood)
Assembly Instructions
The assembly process involves several stages, including preparing the panels, installing drawer runners, assembling the frame, and finally, the drawers.
- Preparation: Ensure you have enough floor space and assemble on a soft surface to avoid scratching the furniture.
- Runner Installation: Attach the drawer runners to the side panels using the provided screws. Pay attention to the orientation marked 'IKEA CR' or 'IKEA CL'.
- Frame Assembly: Connect the side panels and structural supports. Ensure all locking mechanisms are fully engaged until you hear a 'click'.
- Wall Anchoring: This is a critical step. Use the provided wall mounting hardware. The included screws and plugs are suitable for most solid and hollow walls. For solid wood walls, use the screws without plugs. If you are uncertain about your wall type, seek professional advice.
- Drawer Assembly: Assemble the drawer boxes and attach the drawer fronts. Ensure the runners are correctly aligned before inserting the drawers into the frame.
Care and Cleaning
To maintain the furniture:
- Wipe clean with a cloth dampened in a mild cleaner.
- Wipe dry with a clean cloth.
Manufacturer information
IKEA
Practical help
Common problems
Furniture instability or tipping
The unit must be anchored to the wall using the provided tip-over restraints. Do not place heavy items on top.
Difficulty inserting drawers
Ensure the drawer runners are installed in the correct orientation and that all screws are fully tightened.
Before use
- Verify all parts are present according to the parts list.
- Ensure you have the required tools: screwdriver, hammer, pencil, and drill.
- Identify your wall type (solid or hollow) to select the correct mounting method.
- Clear a large, soft area on the floor for assembly.
- Check that all locking mechanisms are fully engaged during assembly.
Specs in practice
- Wall Mounting
- Required for safety; hardware included for most wall types.
Images and diagrams
- The manual includes detailed diagrams for runner installation, showing the correct orientation for left and right sides.
- Wall mounting diagrams illustrate the specific drill bit sizes (8mm for plugs, 3mm for solid wood) and the installation process for different wall types (A, B, C).
Model compatibility
- Included screws and plugs are suitable for most solid and hollow walls.
- For solid wood walls, use screws without plugs.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.