Home Appliances / Small Kitchen Appliances
Lauben Electric Kettle 17BC
Quick guide for the Lauben Electric Kettle 17BC. Learn how to safely operate, clean, and maintain your kettle, including initial setup and usage instructions.
Quick answers from the manual
Quick answer
- To use the Lauben Electric Kettle 17BC, fill it with water between 0.5L and 1.8L, close the lid, place it on the base, and press the main switch. p. 7
Key actions
- Boil water p. 7
- Clean the kettle p. 6
First start
- Boil the kettle three times with maximum capacity (1.8L) and discard the water to remove manufacturing impurities. p. 7
Problems and fixes
Kettle won't restart after boiling
Wait for the kettle to cool down (approx. 25 minutes) until the temperature drops below 90°C.
p. 6Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Capacity | 1.8 L | Maximum water volume | p. 6 |
| Power | 1850–2200 W | Power input | p. 6 |
Where to find it in the PDF
- Safety Measures p. 6
- Product Layout p. 7
- Usage Instructions p. 7
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
Before using your Lauben Electric Kettle 17BC for the first time, it is essential to boil the maximum capacity (1.8 L) of water three times and discard it. This process removes any manufacturing or transportation impurities. Always ensure the kettle is placed on a stable, flat surface and that the base remains dry during operation.
Product layout
- 1. Spout
- 2. Base
- 3. Lid
- 4. Handle
- 5. Grip
- 6. Water level indicator
- 7. Main switch
- 8. LED light
- 9. Water temperature display
Usage
- Turn the kettle so the spout is facing away from you.
- Open the lid by pressing the button.
- Fill with water (min 0.5 L, max 1.8 L). Do not exceed the MAX mark.
- Close the lid securely.
- Place the kettle on the base and plug it into a power socket.
- Press the main power switch.
- Once boiled, lift the kettle by the handle and pour carefully to avoid scalding.
Safety measures
- Do not heat the kettle without water, as this damages the heating element.
- Do not immerse the kettle or base in water or other liquids.
- Do not move the appliance while it is turned on.
- Do not open the lid immediately after boiling; steam is hot.
- The kettle is designed only for boiling water. Do not use it for coffee, tea, or chemicals.
- If the kettle is accidentally turned on without water, disconnect it and let it cool for 15 minutes before refilling.
- For safety, the kettle cannot be restarted immediately after boiling. It requires cooling down (usually about 25 minutes) until the internal temperature drops below 90°C.
Maintenance
Always disconnect the kettle from the power outlet before cleaning and allow it to cool down completely. Do not use non-genuine parts or accessories. If the power cord or plug is damaged, contact an authorized service center.
Technical specifications
- Model: LBNEK17BC
- Power supply: 220–240 V, 50 Hz
- Power input: 1850–2200 W
- Volume: 1.8 L
Manufacturer information
Lauben
Practical help
Common problems
Kettle does not turn on
Ensure the kettle is properly placed on the base and the power cord is connected to a grounded socket.
Water splashes out during boiling
Ensure you have not filled the kettle above the MAX indicator line.
Kettle won't restart immediately after boiling
The safety mechanism prevents restarting until the internal temperature drops below 90°C. Wait approximately 25 minutes.
Before use
- Check that the local voltage matches the kettle's requirements (220-240V).
- Ensure the kettle is on a flat, stable surface.
- Boil the kettle three times with max capacity (1.8L) and discard the water before first use.
- Ensure the base is kept dry.
Images and diagrams
- The kettle features a built-in water temperature display (9) to monitor the heat level.
- The main switch (7) and LED light (8) are located at the base of the kettle body.
Model compatibility
- Designed for domestic use and similar premises like staff kitchens, offices, hotels, and guest houses.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.