Home Appliances / Small Kitchen Appliances
User Manual for Lauben Electric Kettle 17CR
Quick guide for the Lauben Electric Kettle 17CR. Includes safety instructions, usage steps, technical specifications, and maintenance tips.
Quick answers from the manual
Quick answer
- To use the Lauben Electric Kettle 17CR, fill it with water between 0.5L and 1.7L, place it on the base, and press the main power switch. Always ensure the lid is closed and the base is dry. p. 7
Key actions
- Boil 3 times before first use p. 7
- Cleaning p. 6
First start
- Boil 1.7L of water three times and discard it to clean the kettle. p. 7
Problems and fixes
Kettle turned on without water
Disconnect from power and let it cool for 15 minutes before refilling.
p. 6Maintenance and reset
- The kettle has a safety feature that prevents immediate restart after boiling. It must cool down (usually ~25 mins) until the internal temperature drops below 90°C. p. 6
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Capacity | 1.7 l | Maximum water volume | p. 6 |
| Power Input | 1850–2200 W | Power consumption | p. 6 |
Where to find it in the PDF
- Safety Measures p. 6
- Product Layout p. 7
- Usage Instructions p. 7
Table of contents
Quick guide from the manual
The Lauben Electric Kettle 17CR is designed for boiling water in domestic and similar environments. Before using the kettle for the first time, boil the maximum water capacity (1.7L) three times and discard the water to remove any manufacturing or transport residues.
Safety measures
- Do not operate the kettle without water to avoid damaging the heating element.
- Do not immerse the kettle or its base in water or any other liquid.
- Keep the kettle and power cord out of reach of children.
- Do not move the appliance while it is switched on.
- Always ensure the lid is securely closed before boiling.
- Do not touch the spout or open the lid immediately after boiling to avoid scalding.
- Use only the supplied base with the kettle.
Usage
- Turn the kettle so the spout faces away from you.
- Open the lid using the handle/button.
- Fill the kettle with water between the minimum (0.5L) and maximum (1.7L) levels. Do not exceed the MAX mark.
- Ensure the base is dry, then place the kettle on it and plug it into a socket.
- Press the main power switch to start boiling.
- Once boiled, pick up the kettle by the handle and pour the water carefully.
Cleaning and maintenance
Always disconnect the kettle from the power outlet before cleaning and allow it to cool down completely. Do not use abrasive cleaners. For descaling, you may use a vinegar solution or a specialized descaling agent.
Manufacturer information
Lauben
Practical help
Common problems
Kettle does not turn on
Check if the power cord is properly connected to the socket and the kettle is correctly placed on the base.
Kettle overheated or turned off
If the kettle was turned on without sufficient water, disconnect it from the power supply and let it cool down for 15 minutes before refilling.
Before use
- Check that the nominal voltage matches your local power supply.
- Ensure the kettle is placed on a flat, stable surface.
- Boil the maximum capacity (1.7L) three times and discard the water before first use.
- Ensure the base is kept dry.
Specs in practice
- Power Supply
- 220–240 V, 50 Hz.
Images and diagrams
- 6. Water level indicator
- 7. Main switch
Model compatibility
- Designed for domestic use and similar premises (offices, hotels, guest houses).
- Not for outdoor use.
- Use only for heating water; do not use for coffee, tea, or chemicals.
Manual page author
Emily Carter
User documentation editor
Prepares concise manual descriptions and highlights the most useful setup, operation, and maintenance information for readers.