Industrial / Electrical Supports
nVent 12P912SM H-PSM Conduit to Flange Clip User Guide
Quick guide for the nVent 12P912SM H-PSM conduit to flange clip. Includes installation instructions, product specifications, and compatibility details for 3/4 inch EMT conduit.
Table of contents
Manual images
Click an image to enlargeQuick Guide
This document provides essential information for the nVent 12P912SM H-PSM conduit to flange clip. This component is designed for side-mount applications and is engineered for quick installation using only a hammer.
Product Overview
The 12P912SM is a side-mount conduit to flange clip constructed from spring steel with an nVent CADDY Armour finish. It is compatible with EMT, rigid, and aluminum conduit and features a 360-degree pivot capability to accommodate various installation angles.
Specifications
- Orientation: Side Mount
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 3/4 inch
- Outer Diameter Range: 0.866 inch – 1.181 inch
- Flange Thickness Range: 9/16 inch – 3/4 inch
- Ultimate Static Load: 25 lb
Installation
The installation process is straightforward and requires only a hammer. Ensure the mounting surface (flange) and the conduit diameter fall within the specified ranges listed in the specifications section before attempting installation. The clip is designed to be hammered into place to secure the conduit to the flange.
Safety and Warnings
nVent products must be installed and used strictly according to the provided instruction sheets. Improper installation, misuse, or failure to follow these instructions may result in product malfunction, property damage, serious bodily injury, or death, and may void the product warranty.
Practical help
Common problems
Product does not fit the flange
Verify that the flange thickness is between 9/16 inch and 3/4 inch.
Conduit does not fit the clip
Ensure the conduit is 3/4 inch EMT, rigid, or aluminum, with an outer diameter between 0.866 inch and 1.181 inch.
Load capacity concerns
Do not exceed the ultimate static load limit of 25 lb.
Before use
- Verify the flange thickness is within 9/16" – 3/4".
- Confirm the conduit type is EMT, rigid, or aluminum.
- Ensure the conduit outer diameter is between 0.866" and 1.181".
- Have a hammer ready for installation.
- Check that the mounting location can support the 25 lb static load.
Specs in practice
- Ultimate Static Load: 25 lb
- The maximum weight the clip is designed to support safely.
- nVent CADDY Armour
- A specialized corrosion-resistant finish applied to the spring steel.
Images and diagrams
- The diagram illustrates the attachment of the clip to a flange (FT) and the securement of the conduit (OD).
- Arrows indicate the direction of the load (F) and the points of measurement for flange thickness and outer diameter.
Model compatibility
- Compatible with EMT, rigid, and aluminum conduit.
- Designed specifically for side-mount orientation.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.