Industrial / Electrical Supports
nVent CADDY 16P4I Push In Conduit Clamp User Guide
Quick guide for the nVent CADDY 16P4I Push In Conduit Clamp. Learn about installation, product specifications, load ratings, and mounting orientations.
Quick answers from the manual
Quick answer
- The nVent CADDY 16P4I is a push-in conduit clamp for 1-inch EMT, designed to eliminate the need for offset bending and support vertical or horizontal installations. p. 1
Key actions
- Install the clamp using the 1/4-inch threaded hole. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Material | Spring Steel | Construction material | p. 1 |
| Static Load | 25 lb / 15 lb | Maximum load capacity | p. 1 |
Where to find it in the PDF
- Product Specifications p. 1
- Diagrams and Warnings p. 2
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
The nVent CADDY 16P4I is a push-in conduit clamp designed for 1-inch EMT conduit. It simplifies installation by eliminating the need for offset conduit bending and supports both vertical and horizontal mounting configurations.
Product Overview
The clamp is constructed from spring steel with an nVent CADDY Armour finish. It features a 1/4-inch threaded hole for secure mounting.
Installation and Usage
The clamp is designed for push-in installation of conduit. It can be used in either vertical or horizontal orientations. Ensure the mounting surface and the threaded rod used with the 1/4-inch hole are capable of supporting the static load of the installation.
Technical Specifications
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 1 inch
- Outer Diameter: 1.181 inch Min; 1.378 inch Max; 1.000 inch Nom
- Hole Size: 1/4 inch (Threaded)
- Ultimate Static Load 1: 25 lb
- Ultimate Static Load 2: 15 lb
Safety and Support
nVent products must be installed and used strictly according to the provided instruction sheets and training materials. Improper installation, misuse, or misapplication may result in product malfunction, property damage, or serious bodily injury. For technical support or customer care, contact nVent through their official website at www.nvent.com or via the regional contact numbers provided in the documentation.
Official resources from the manual
Practical help
Common problems
Improper installation or misuse
Follow nVent instruction sheets and training materials to avoid product malfunction, property damage, or injury.
Before use
- Verify the conduit is 1-inch EMT.
- Ensure the mounting structure can support the static load.
- Confirm the orientation (vertical or horizontal) is appropriate for the application.
- Check that the threaded rod or fastener fits the 1/4-inch threaded hole.
Specs in practice
- EMT Conduit Size
- The clamp is specifically sized for 1-inch Electrical Metallic Tubing.
- Ultimate Static Load
- The maximum weight capacity the clamp can support (25 lb or 15 lb depending on configuration).
Images and diagrams
- Diagrams illustrate the clamp mounted with a threaded rod.
- The diagrams show both vertical and horizontal mounting orientations.
- F1 and F2 arrows indicate the direction of the static load applied to the clamp.
Model compatibility
- Compatible with 1-inch EMT conduit.
- Requires a 1/4-inch threaded fastener for mounting.
Manual page author
David Miller
Documentation analyst
Organizes user manual content into clear summaries, with attention to model details, product context, and everyday usability.