Industrial / Pipe Supports
Product Specification for nVent 150M0500S4 Standard U-Bolt
Technical specifications and safety guidelines for the nVent 150M0500S4 Standard U-Bolt. Includes dimensions, material details, load capacity, and installation warnings.
Table of contents
Manual images
Click an image to enlargeQuick guide from the manual
This document provides technical specifications and safety information for the nVent 150M0500S4 Standard U-Bolt. It is intended for use in general piping applications. Always ensure proper installation to avoid product malfunction or safety hazards.
Product Overview
The 150M Standard U-Bolt is designed for general piping support. The unit comes complete with 4 nuts, with 2 nuts pre-installed on each end for convenience. It conforms to Federal Specification WW-H-171 (Type 24) and Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 24).
Technical Specifications
- Material: Stainless Steel 304 (EN 1.4301)
- Pipe Size: 5"
- Outer Diameter: 5 9/16"
- Rod Size: 1/2"
- Screw Length: 3"
- Static Load: 2,020 lb
- Dimensions: A: 8 5/16", B: 6 1/16"
Diagrams
The diagram illustrates the U-bolt configuration, showing the relationship between the pipe outer diameter (OD), rod size (RS), and the overall dimensions (A, B, L) required for proper installation and fitment.
Safety Information
nVent products must be installed and used strictly according to provided instruction sheets and training materials. Improper installation, misuse, misapplication, or failure to follow instructions may result in product malfunction, property damage, serious bodily injury, or death, and may void the warranty. Instruction sheets are available at www.nvent.com or through your nVent customer service representative.
Official resources from the manual
Practical help
Common problems
Improper installation or misuse
Follow nVent instruction sheets and training materials strictly to avoid product malfunction, property damage, or injury.
Before use
- Verify the pipe size is 5 inches
- Ensure the rod size is 1/2 inch
- Check that all 4 nuts are included (2 installed on each end)
- Confirm the application meets the static load limit of 2,020 lb
Images and diagrams
- The diagram shows the U-bolt dimensions including A (total length), B (width), L (thread length), and OD (outer diameter of the pipe).
Model compatibility
- Conforms with Federal Specification WW-H-171 (Type 24)
- Conforms with Manufacturers Standardization Society ANSI/MSS-SP-58 (Type 24)
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.