Industrial / Pipe Supports
nVent CADDY 16P Push In Conduit Clamp User Guide
Quick guide for the nVent CADDY 16P Push In Conduit Clamp. Includes installation features, technical specifications, load ratings, and safety warnings for 1-inch EMT conduit applications.
Quick answers from the manual
Quick answer
- The nVent CADDY 16P is a push-in conduit clamp for 1-inch EMT, designed to eliminate the need for offset bending. It supports both vertical and horizontal installations. p. 1
Key actions
- Install the clamp using the 7 mm hole. p. 1
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Material | Spring Steel | Construction material of the clamp | p. 1 |
| Outer Diameter | 30 – 35 mm | Compatible conduit size | p. 1 |
| Ultimate Static Load 1 | 110 N | Vertical load capacity | p. 1 |
| Ultimate Static Load 2 | 65 N | Horizontal load capacity | p. 1 |
Where to find it in the PDF
- Product Overview and Specifications p. 1
- Safety and Contact Information p. 2
Table of contents
Quick guide from the manual
The nVent CADDY 16P is a push-in conduit clamp designed for 1-inch EMT conduit. It is engineered to simplify installation by eliminating the need for offset conduit bending. The clamp is suitable for both vertical and horizontal mounting configurations.
Product features
- Push-in installation: Allows for rapid mounting of conduit.
- Offset bending elimination: Simplifies the installation process by removing the need to bend conduit.
- Versatile mounting: Can be used for either vertical or horizontal installations.
Technical specifications
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Outer Diameter Compatibility: 30 – 35 mm
- Hole Size: 7 mm
- Hole Type: Plain
- Ultimate Static Load 1 (Vertical): 110 N
- Ultimate Static Load 2 (Horizontal): 65 N
Safety information
nVent products must be installed and used strictly as indicated in the provided instruction sheets and training materials. Improper installation, misuse, or failure to follow instructions may result in product malfunction, property damage, or serious bodily injury. Always ensure the installation environment meets the load requirements specified for the clamp.
Contact and support
For technical support or customer care, contact nVent through the following channels:
North America: +1.800.753.9221 (Option 1 for Customer Care, Option 2 for Technical Support)
Europe (Netherlands): +31 800-0200135
Europe (France): +33 800 901 793
Europe (Germany): 800 1890272
Europe (Other Countries): +31 13 5835404
APAC (Shanghai): +86 21 2412 1618/19
APAC (Sydney): +61 2 9751 8500
Practical help
Common problems
Conduit does not fit
Ensure the conduit outer diameter is within the 30-35 mm range.
Exceeding load capacity
Verify that the static load does not exceed 110 N for vertical installations or 65 N for horizontal installations.
Before use
- Verify the conduit is 1-inch EMT.
- Ensure the mounting surface is compatible with a 7 mm hole.
- Confirm the installation orientation (vertical or horizontal) matches the load rating requirements.
- Check that the conduit outer diameter is between 30 mm and 35 mm.
Specs in practice
- Ultimate Static Load 1
- Maximum vertical load capacity of 110 N.
- Ultimate Static Load 2
- Maximum horizontal load capacity of 65 N.
- Outer Diameter
- The range of conduit sizes (30-35 mm) compatible with the clamp.
Images and diagrams
- The diagrams illustrate the clamp's orientation for vertical and horizontal load applications.
- HS indicates the hole size for mounting.
- OD indicates the outer diameter of the conduit being clamped.
- F1 and F2 represent the direction of the static load applied to the clamp.
Model compatibility
- Designed specifically for 1-inch EMT conduit.
- Compatible with vertical and horizontal mounting surfaces.
Manual page author
Michael Turner
Technical manual editor
Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.