findmanualpdf.com

Datasheet for Philips CertaDrive 4W 0.1A 40V LPF I 230V LED Driver

Quick guide for the Philips CertaDrive 4W 0.1A 40V LPF I 230V LED driver, covering electrical specifications, wiring connections, dimensions, and operational limits.

Table of contents

Manual images

Jump to the section
Wiring diagram showing input (N, L) and output (LED+, LED-) terminals. Page 3 Dimensional drawing of the LED driver. Page 4 Lifetime vs. Tcase temperature graph. Page 5 Understand the inrush current waveform parameters. Page 6 Review the output voltage versus output current characteristics. Page 7 Check the power factor (PF) performance relative to output power. Page 7

Quick guide from the manual

The Philips CertaDrive 4W 0.1A 40V LPF I 230V is a constant current LED driver designed for indoor point lighting applications, such as downlights, spotlights, and track lighting. It is suitable for both built-in and independent use in Class II fixtures.

Wiring and Connections

Ensure correct wiring according to the following specifications:

Wiring diagram showing input (N, L) and output (LED+, LED-) terminals.
Wiring diagram showing input (N, L) and output (LED+, LED-) terminals.
Dimensional drawing of the LED driver.
Dimensional drawing of the LED driver.
Understand the inrush current waveform parameters.
Understand the inrush current waveform parameters.
Review the output voltage versus output current characteristics.
Review the output voltage versus output current characteristics.
Check the power factor (PF) performance relative to output power.
Check the power factor (PF) performance relative to output power.
Analyze the Total Harmonic Distortion (THD) performance.
Analyze the Total Harmonic Distortion (THD) performance.
  • Input wire: 0.75 to 1.5 mm² (18 to 16 AWG), solid or stranded, strip length 8 to 9 mm.
  • Output wire: 0.5 to 1.5 mm² (20 to 16 AWG), solid or stranded, strip length 8 to 9 mm.
  • Maximum cable length: 0.6 meters (total length including LED module, one way).

Operational Parameters

Lifetime vs. Tcase temperature graph.
Lifetime vs. Tcase temperature graph.
  • Input Voltage: 220 to 240 Vac (performance range).
  • Output: Constant current 0.1 A, voltage range 30 to 40 Vdc.
  • Ambient Temperature: -20 to +45 °C.
  • Tcase-max: 75 °C.
  • Protection: Includes open load, short circuit, and over power protection with automatic recovery.

Safety and Compliance

The device is classified as SELV (Safety Extra Low Voltage) and is suitable for Class II fixtures per IEC60598. It features an ingress protection rating of IP20. Hot wiring is not supported.

Manufacturer information

Philips

Brand profile
Manufacturer website https://www.philips.com Support https://www.philips.com/consumer-electronics/support Manufacturer manuals https://www.philips.com/consumer-electronics/support

Practical help

Common problems

Driver failure or reduced lifetime

Ensure the Tcase-point temperature does not exceed 75 °C. Operating at lower temperatures (e.g., Tcase-life 65 °C) significantly extends driver lifetime.

Inrush current issues with multiple drivers

If using several mini circuit breakers side-by-side, apply an 80% correction factor to the rated current.

Before use

  • Verify the input voltage is within the 220-240 Vac range.
  • Ensure the LED module is compatible with 0.1 A constant current.
  • Check that the total cable length does not exceed 0.6 meters.
  • Confirm the fixture is Class II compliant.
  • Ensure proper wire stripping (8-9 mm) for secure terminal connection.

Images and diagrams

  • The wiring diagram shows the N and L input terminals on one side and the LED+ and LED- output terminals on the opposite side.
  • The lifetime graph illustrates that maintaining the Tcase-point at or below Tcase-life -10 °C maximizes the driver's operational life to 50,000 hours.

Model compatibility

  • Designed for indoor point lighting (down, spot, track).
  • Not suitable for hot wiring.
  • Compatible with LED COB solutions.

Related manuals

Related manuals from the same brand or category.

Manual page author

Michael Turner

Technical manual editor

Reviews PDF manuals for structure, safety notes, and practical product details so readers can find the right information quickly.