Lighting / LED Lamps
Product Specification and Guide for Philips CorePro LEDtube EM/Mains T8
Comprehensive product specification and guide for the Philips CorePro LEDtube EM/Mains T8 series. Includes technical data, dimensions, electrical requirements, and installation overview.
Quick answers from the manual
Quick answer
- The Philips CorePro LEDtube EM/Mains T8 is designed to replace T8 fluorescent tubes. It can be installed by either replacing the existing fluorescent starter (for electromagnetic ballasts) or by rewiring the luminaire for direct mains connection. p. 1, 2
Key actions
- Installation must be performed by a certified professional. p. 2
Technical specifications
| Parameter | Value | Meaning | Pages |
|---|---|---|---|
| Input Frequency | 50 to 60 Hz | Operating frequency range. | p. 7 |
| Ambient Temperature | -20°C to 45°C | Operating temperature range. | p. 7 |
Show 1 more answers Show less
Where to find it in the PDF
- Product Overview p. 1
- Dimensional Drawings p. 2, 3, 4, 5
- Technical Specifications p. 7, 8, 9, 10
Table of contents
Quick guide from the manual
This document provides technical specifications and product information for the Philips CorePro LEDtube EM/Mains T8 series. It is intended for use by professionals to identify the correct product variant and ensure proper installation.
Product Overview
The CorePro LEDtube series is designed as a direct replacement for T8 fluorescent tubes. Key benefits include:
- Optimized energy savings (approx. 50% more than fluorescent alternatives).
- Easy installation (retrofit or rewire).
- Longer lifetime compared to traditional fluorescent tubes.
- Available in various color temperatures (4000K and 6500K) and lengths (600mm, 1200mm, 1500mm, 1800mm).
Installation Methods
There are two primary methods for installing these LED tubes:
- Retrofit: Simply change the existing fluorescent starter to an LED starter for use with electromagnetic ballasts.
- Rewire: Rewire the existing fluorescent-based luminaire to allow the LED tube to work directly on the mains voltage.
Note: Installation must be performed by a certified professional according to the provided diagrams or online resources.
Technical Specifications
The product family includes a wide range of models with varying power ratings and dimensions. Key technical parameters include:
- Input Frequency: 50 to 60 Hz.
- Starting Time: 0.5 seconds.
- Cap-Base: G13.
- Color Rendering Index (CRI): 80.
- Ambient Temperature Range: -20°C to 45°C.
- Storage Temperature: -40°C.
Detailed dimensions (D1, D2, A1, A2, A3) and electrical data (Voltage, Power) for every specific order code are provided in the tables within the document.
Safety Information
The overall energy efficiency and light distribution of any installation are determined by the design of the luminaire. Always ensure the installation is performed by a certified professional.
Manufacturer information
Philips
Practical help
Common problems
Tube does not fit in the fixture
Verify the length (600mm, 1200mm, 1500mm, 1800mm) and base type (G13) against the specific product code in the technical tables.
Installation uncertainty
Ensure installation is performed by a certified professional. Determine if you are using the retrofit method (starter replacement) or the rewire method (direct mains).
Before use
- Verify the existing luminaire type (Electromagnetic ballast vs. Mains).
- Check the required length and color temperature.
- Ensure the installation is performed by a certified professional.
- Confirm the voltage compatibility (220-240V or 100-277V depending on the model).
Show more Show less
Specs in practice
- Color Temperature
- Measured in Kelvin (K); 3000K is warm white, 4000K is cool white, 6500K is daylight.
Images and diagrams
- Dimensional drawings show D1, D2 (diameter) and A1, A2, A3 (lengths) to ensure fitment in existing fixtures.
Model compatibility
- Compatible with Electromagnetic ballasts (via starter replacement) or direct Mains connection (via rewiring).
Manual page author
Emily Carter
User documentation editor