User Manual for RØDE Wireless Micro

Quick Start Guide

Follow these steps to set up your RØDE Wireless Micro system:

1. Remove both transmitters from the charging case.
2. Remove the stickers covering their charging pins.
3. Return the transmitters to the case.
4. Remove both transmitters from the case again; their LEDs will begin to flash, indicating they are powered on.
5. Remove the receiver from the case and connect it directly to your phone. Its LEDs will flash to indicate it is pairing, and then remain solid when paired.
6. Start recording.

Software and Firmware

Download RØDE Central to adjust settings and update your firmware at rode.com/apps/rode-central.

Important Safety Information

• Read and understand the instructions and safety guide completely before using the product.
• Ensure the instruction manual and safety guide are accessible to all users.
• Only use this product with authorized RØDE accessories.
• Do not open the product housing; this will void the warranty.
• Refer all service and repairs to RØDE-approved service personnel.
• Do not use the product if it was damaged during transportation.
• Keep the product away from liquids and electrically conductive objects.
• Do not use solvents or corrosive cleaning agents.
• Do not adjust the control of the product in an environment that requires your attention (e.g., driving).
• This appliance contains a battery that is only replaceable by a skilled person.

Technical Specifications

Power: 5VDC, 0.5A.