Ryobi Cordless Lawn Mower User Manual

Quick guide from the manual

This manual provides essential safety and operating instructions for your Ryobi cordless lawn mower. Before using the product, ensure you have read and understood all safety warnings. The mower is designed for domestic lawn mowing and should only be used outdoors. Always ensure all four wheels are on the ground during operation.

Safety Warnings

Personal Safety: The mower can amputate hands and feet and throw objects. Never allow children or untrained individuals to operate the product. Always wear heavy, long trousers, long sleeves, and sturdy anti-slip footwear. Never operate the product while tired or under the influence of drugs, alcohol, or medication.

Work Area Safety: Keep people, especially children, and pets at least 15 meters away from the operating area. Thoroughly inspect the area and remove all rocks, sticks, metal, wire, bones, or toys before mowing.

Operation

To start the product, press the Start button and then the On-off button. Release the Start button and keep pressing the On-off button to run the product. Release the On-off button to stop the product. Always remove the isolator key and battery pack when leaving the product unattended, before clearing blockages, or before performing maintenance.

Maintenance

Use only original manufacturer’s replacement parts. Regularly check all nuts, bolts, and screws for proper tightness. The blade is sharp; use extreme caution and wear heavy-duty gloves when fitting, replacing, cleaning, or checking bolt security. If the product starts to vibrate abnormally, stop immediately and inspect for damage, particularly the blades.

Transportation and Storage

Turn off the product, remove the isolator key, and the battery pack. Allow the product to cool down before storing or transporting. Store in a cool, dry, and well-ventilated place inaccessible to children. Keep away from corrosive agents such as garden chemicals and de-icing salts.

Troubleshooting

If the product stops during operation, it may be due to the overload protection device. Release the on-off button and press it again to restart. If the battery pack overheats, allow it to cool down before resuming operation. If the product still does not work, recharge the battery.